EUVIMEDOpdag EUVIMED
Crossref

Reengineering Waste Boxwood Powder into Light and High-Strength Biodegradable Composites to Replace Petroleum-Based Synthetic Materials

Yang Yang iD, Lei Zhang, JiJuan Zhang, Yi Ren iD, HongFei Huo, Xu Zhang, Kai Huang, Zhongfeng Zhang

ACS Applied Materials & Interfaces · 2023-01-25 · 15 (3) · 4505-4515

DOI: 10.1021/acsami.2c19844 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-01-11. Written by Yang Yang and 7 co-authors. Institution: College of Furniture and Art Design, Central South University of Forestry and Technology, Changsha 410004, Hunan, China. Cited 29 times so far (Crossref); 43 references. Funded by: National Natural Science Foundation of China, Hunan Province.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The preparation of biocomposites from renewable and sustainable forestry residues is an effective method to significantly reduce the environmental pollution caused by synthetic materials such as plastics and synthetic fibers. This study is aimed at developing a clean process for the large-scale production of high-performance green biocomposites without involving any chemical adhesive. Adhesive-free biocomposites with superior mechanical properties were prepared using HCl ball milling pretreatment and in situ synthesis. The nano-Fe3O4 was uniformly dispersed in the cellulose matrix, and when the matrix was subjected to external forces, the stress concentration effect around the particles absorbed energy, thus effectively improving the mechanical strength of the matrix. The flexural strength and tensile strength of BWP(Fe3O4) samples were increased by 159.04 and 175.34%, compared to that of regular wood powder control samples. The lignin melts under high temperature and pressure and then forms a carbonized layer on the surface of the biocomposites during the cooling process, which prevents the rapid penetration of water from the surface and also gives the biocomposites good thermal stability. The results of this research can avoid the harmful volatiles generated by chemical adhesive than that of the traditional fiberboard process and effectively replace petroleum-based synthetic materials prepared using the addition of various chemical additives, making it conform to the concept of environmental protection and sustainability.

Subjects

Author keywords

adhesive-freebiocompositesenvironmental impactsgreen/sustainable engineeringmechanical strength

Authors and institutions

  • College of Furniture and Art Design, Central South University of Forestry and Technology, Changsha 410004, Hunan, China.
  • Green Furniture Engineering Technology Research Center, National Forestry & Grassland Administration, Changsha 410004, Hunan, China.
  • Green Home Engineering Technology Research Center in Hunan, Changsha 410004, Hunan, China.
  • Dongyang Furniture Institute, Dongyang 322100, China.

ORCID profiles: Yang Yang, Yi Ren

Funding

  • National Natural Science Foundation of China
  • Hunan Province

Cite

APA

Yang, Y., Zhang, L., Zhang, J., Ren, Y., Huo, H., Zhang, X., Huang, K., & Zhang, Z. (2023). Reengineering Waste Boxwood Powder into Light and High-Strength Biodegradable Composites to Replace Petroleum-Based Synthetic Materials. ACS Applied Materials & Interfaces, 15(3), 4505-4515. https://doi.org/10.1021/acsami.2c19844

Vancouver

Yang Y, Zhang L, Zhang J, Ren Y, Huo H, Zhang X, et al. Reengineering Waste Boxwood Powder into Light and High-Strength Biodegradable Composites to Replace Petroleum-Based Synthetic Materials. ACS Applied Materials & Interfaces. 2023;15(3):4505-4515. doi:10.1021/acsami.2c19844

BibTeX
@article{Yang2023,
  author = {Yang, Yang and Zhang, Lei and Zhang, JiJuan and Ren, Yi and Huo, HongFei and Zhang, Xu and Huang, Kai and Zhang, Zhongfeng},
  title = {Reengineering Waste Boxwood Powder into Light and High-Strength Biodegradable Composites to Replace Petroleum-Based Synthetic Materials},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {3},
  pages = {4505--4515},
  doi = {10.1021/acsami.2c19844}
}
Start for free →