EUVIMEDAtrasti EUVIMED
Crossref

Enhancing Electromechanical Properties of PZT-Based Piezoelectric Ceramics by High-Temperature Poling for High-Power Applications

Wugang Wang iD, Zhengran Chen, Zhiyong Zhou iD, Yaoguo Li, Ruihong Liang iD

ACS Applied Materials & Interfaces · 2023-03-29 · 15 (12) · 15636-15645

DOI: 10.1021/acsami.2c19802 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-03-17. Written by Wugang Wang and 4 co-authors. Institution: Key Laboratory of Inorganic Functional Materials and Devices, Shanghai Institute of Ceramics, Chinese Academy of Sciences, 1295 Dingxi Road, Shanghai…. Cited 75 times so far (Crossref); 41 references. Funded by: Ministry of Science and Technology of the People's Republic of China, National Natural Science Foundation of China, Chinese Academy of Sciences.

SantraukaSubjectsBibliografiniai duomenysCiteRelated studies

Abstract (original language)

Defect engineering is a proven method to tune the properties of perovskite oxides. In demanding high-power piezoelectric ceramic applications, acceptor doping is the most effective method to harden ceramics, but it inevitably degrades the ceramics' electromechanical properties. Herein, a poling method based on acceptor doping, namely, high-temperature poling, is implemented by applying an electric field above the Curie temperature for poling to achieve a balance of the properties of piezoelectric coefficient d33 and mechanical quality factor Qm. After high-temperature poling, the piezoelectric property of 0.6 mol % Mn-doped Pb0.92Sr0.08(Zr0.533Ti0.443Nb0.024)O3 is d33 = 483 pC/N and Qm = 448. Compared with the traditional poling, the piezoelectric coefficient d33 of the high-temperature poling ceramics increased by approximately 40%, and Qm also increased by nearly 18%. Therefore, high d33 and Qm were exhibited by our PZT piezoelectric ceramics. Rayleigh's law analysis, XRD, and transmission electron microscopy analysis show that, after high-temperature poling, the considerably increased d33 is related to the large increase in the reversible domain wall motion in the intrinsic effect, while the slightly increased Qm is related to the inhibited irreversible domain wall motion in the extrinsic effect. This study reports a method for high-temperature poling and provides insights into the design of high-power piezoelectric ceramics with high d33 and Qm.

Subjects

Author keywords

PZTdefect dipoleshigh d33 and high Qmhigh-power applicationshigh-temperature poling

Authors and institutions

  • Key Laboratory of Inorganic Functional Materials and Devices, Shanghai Institute of Ceramics, Chinese Academy of Sciences, 1295 Dingxi Road, Shanghai 200050, People's Republic of China.
  • Laboratory of Science and Technology on Marine Navigation and Control, China State Shipbuilding Corporation, 268 Dingzigu First Road, Hongqiao District, Tianjin 300131, People's Republic of China.
  • Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Science, Beijing 100049, People's Republic of China.
  • School of Physical Science and Technology, ShanghaiTech University, Shanghai 201210, People's Republic of China.
  • State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, People's Republic of China.
  • Beijing Keeven Aviation Instrument Co. Ltd., Courtyard 5, Shijun Street, Renhe Town, Shunyi District, Beijing 101399, People's Republic of China.

ORCID profiles: Wugang Wang, Zhiyong Zhou, Ruihong Liang

Funding

  • Ministry of Science and Technology of the People's Republic of China
  • National Natural Science Foundation of China
  • Chinese Academy of Sciences
  • Laboratory of Science and Technology on Marine Navigation and Control, China State Shipbuilding Corporation

Cite

APA

Wang, W., Chen, Z., Zhou, Z., Li, Y., & Liang, R. (2023). Enhancing Electromechanical Properties of PZT-Based Piezoelectric Ceramics by High-Temperature Poling for High-Power Applications. ACS Applied Materials & Interfaces, 15(12), 15636-15645. https://doi.org/10.1021/acsami.2c19802

Vancouver

Wang W, Chen Z, Zhou Z, Li Y, Liang R. Enhancing Electromechanical Properties of PZT-Based Piezoelectric Ceramics by High-Temperature Poling for High-Power Applications. ACS Applied Materials & Interfaces. 2023;15(12):15636-15645. doi:10.1021/acsami.2c19802

BibTeX
@article{Wang2023,
  author = {Wang, Wugang and Chen, Zhengran and Zhou, Zhiyong and Li, Yaoguo and Liang, Ruihong},
  title = {Enhancing Electromechanical Properties of PZT-Based Piezoelectric Ceramics by High-Temperature Poling for High-Power Applications},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {12},
  pages = {15636--15645},
  doi = {10.1021/acsami.2c19802}
}
Start for free →