Solar-Light-Responsive Zinc–Air Battery with Self-Regulated Charge–Discharge Performance based on Photothermal Effect
ACS Applied Materials & Interfaces · 2023-01-18 · 15 (2) · 2985-2995
DOI: 10.1021/acsami.2c19663 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2023-01-09. Written by Shushan Zheng and 6 co-authors. Institution: School of Materials Science and Engineering, Anhui University, Hefei, Anhui 230601, P.R. China. Cited 16 times so far (Crossref); 57 references. Funded by: Ministry of Science and Technology of the People's Republic of China, Anhui Provincial Department of Education, National Natural Science Foundation of China.
Abstract (original language)
It is extremely challenging to significantly increase the voltaic efficiency, power density, and cycle stability of a Zn-air battery by just adjusting the catalytic performance of the cathode with nanometers/atomistic engineering because of the restriction of thermodynamic equilibrium potential. Herein, inspired by solar batteries, the S-atom-bridged FeNi particles and N-doped hollow carbon nanosphere composite configuration (FeNi-S,N-HCS) is presented as a prototype of muti-functional air electrode material (intrinsic electrocatalytic function and additional photothermal function) for designing photoresponsive all-solid-state Zn-air batteries (PR-ZABs) based on the photothermal effect. The local temperature of the FeNi-S,N-HCS electrode can well respond to the stimuli of sunlight irradiation because of their superior photothermal effect. As expected, under illumination, the power density of the as-fabricated PR-ZABs based on the FeNi-S,N-HCS electrode can be improved from 77 mW cm-2 to 126 mW cm-2. Simultaneously, charge voltage can be dramatically reduced, and cycle lifetime is also prolonged under illumination, because of the expedited electrocatalytic kinetics, the increased electrical conductivity, and the accelerated desorption rate of O2 bubbles from the electrode. By exerting the intrinsic electrocatalytic and photothermal efficiency of the electrode materials, this research paves new ways to improve battery performance from kinetic and thermodynamic perspectives.
Subjects
Author keywords
Authors and institutions
- School of Materials Science and Engineering, Anhui University, Hefei, Anhui 230601, P.R. China.
- Institute of Energy, Hefei Comprehensive Nation Science Center, Hefei, Anhui 230031, P.R. China.
- Key Laboratory of Strongly-Coupled Quantum Matter Physics, Chinese Academy of Sciences, School of Physical Sciences, University of Science and Technology of China, Hefei, Anhui 230026, P.R. China.
- School of Physics and Electronics, Shandong Normal University, Jinan 250014, P. R. China.
ORCID profiles: Tongtong Jiang, Mingzai Wu
Funding
- Ministry of Science and Technology of the People's Republic of China
- Anhui Provincial Department of Education
- National Natural Science Foundation of China
- Southwest University of Science and Technology
- Anhui Province
Cite
APA
Zheng, S., Chen, M., Chen, K., Wu, Y., Yu, J., Jiang, T., & Wu, M. (2023). Solar-Light-Responsive Zinc–Air Battery with Self-Regulated Charge–Discharge Performance based on Photothermal Effect. ACS Applied Materials & Interfaces, 15(2), 2985-2995. https://doi.org/10.1021/acsami.2c19663
Vancouver
Zheng S, Chen M, Chen K, Wu Y, Yu J, Jiang T, et al. Solar-Light-Responsive Zinc–Air Battery with Self-Regulated Charge–Discharge Performance based on Photothermal Effect. ACS Applied Materials & Interfaces. 2023;15(2):2985-2995. doi:10.1021/acsami.2c19663
BibTeX
@article{Zheng2023,
author = {Zheng, Shushan and Chen, Mengyu and Chen, Kui and Wu, Yongjian and Yu, Jing and Jiang, Tongtong and Wu, Mingzai},
title = {Solar-Light-Responsive Zinc–Air Battery with Self-Regulated Charge–Discharge Performance based on Photothermal Effect},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {2},
pages = {2985--2995},
doi = {10.1021/acsami.2c19663}
}
EUVIMED