EUVIMEDOdkrijte EUVIMED
Crossref

Effect of Polysulfide Speciation on Mg Anode Passivation in Mg–S Batteries

Michelle D Qian iD, Forrest A L Laskowski iD, Skyler D Ware iD, Kimberly A See iD

ACS Applied Materials & Interfaces · 2023-02-22 · 15 (7) · 9193-9202

DOI: 10.1021/acsami.2c19488 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-02-08. Written by Michelle D Qian and 3 co-authors. Institution: Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125, United States. Cited 14 times so far (Crossref); 70 references. Funded by: Division of Graduate Education, David and Lucile Packard Foundation, Arnold and Mabel Beckman Foundation.

PovzetekSubjectsBibliografski podatkiCiteRelated studies

Abstract (original language)

Mg-S batteries are a promising next-generation system for beyond conventional Li-ion chemistry. The Mg-S architecture pairs a Mg metal anode with an inexpensive, high-capacity S8 cathode. However, S8-based cathodes exhibit the "polysulfide shuttle" effect, wherein soluble partially reduced Sx2- species generated at the cathode diffuse to and react with the anode. While dissolved polysulfides may undergo reactions to form Li+-permeable layers in Li-S systems, the interfaces on Mg anodes are passivating. In this work, we probe the reactivity of various Mg polysulfide solutions at the Mg anode interface. Mg polysulfide solutions are prepared without any chelating agents to closely mimic conditions in a Mg-S cell. The polysulfides are synthesized by reacting Mg metal and S8 in electrolyte, and the speciation is controlled by varying the Mg:S precursor ratio. S-poor precursor ratios produce magnesium polysulfide solutions with a higher proportion of short-chain polysulfides that react at the Mg anode faster than the longer-chain analogues. Anode passivation can be slowed by shifting the polysulfide equilibria toward longer-chain polysulfides through addition of S8.

Subjects

Author keywords

Mg corrosionMg interfacesMg passivationMg−S batterymagnesium polysulfidespolysulfide shuttle

Authors and institutions

  • Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125, United States.

ORCID profiles: Michelle D Qian, Forrest A L Laskowski, Skyler D Ware, Kimberly A See

Funding

  • Division of Graduate Education
  • David and Lucile Packard Foundation
  • Arnold and Mabel Beckman Foundation

Cite

APA

Qian, M. D., Laskowski, F. A. L., Ware, S. D., & See, K. A. (2023). Effect of Polysulfide Speciation on Mg Anode Passivation in Mg–S Batteries. ACS Applied Materials & Interfaces, 15(7), 9193-9202. https://doi.org/10.1021/acsami.2c19488

Vancouver

Qian MD, Laskowski FAL, Ware SD, See KA. Effect of Polysulfide Speciation on Mg Anode Passivation in Mg–S Batteries. ACS Applied Materials & Interfaces. 2023;15(7):9193-9202. doi:10.1021/acsami.2c19488

BibTeX
@article{Qian2023,
  author = {Qian, Michelle D and Laskowski, Forrest A L and Ware, Skyler D and See, Kimberly A},
  title = {Effect of Polysulfide Speciation on Mg Anode Passivation in Mg–S Batteries},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {7},
  pages = {9193--9202},
  doi = {10.1021/acsami.2c19488}
}
Start for free →