High-Performance Skutterudite/Half-Heusler Cascaded Thermoelectric Module Using the Transient Liquid Phase Sintering Joining Technique
ACS Applied Materials & Interfaces · 2023-01-18 · 15 (2) · 2961-2970
DOI: 10.1021/acsami.2c19137 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2023-01-04. Written by Wenjie Li and 11 co-authors. Institution: Department of Materials Science and Engineering, Pennsylvania State University, University Park, Pennsylvania16802, United States. Cited 37 times so far (Crossref); 58 references. Funded by: Defense Advanced Research Projects Agency, Basic Energy Sciences, Advanced Research Projects Agency - Energy.
Abstract (original language)
Thermoelectric (TE) materials have made rapid advancement in the past decade, paving the pathway toward the design of solid-state waste heat recovery systems. The next requirement in the design process is realization of full-scale multistage TE devices in the medium to high temperature range for enhanced power generation. Here, we report the design and manufacturing of full-scale skutterudite (SKD)/half-Heusler (hH) cascaded TE devices with 49-couple TE legs for each stage. The automated pick-and-place tool is employed for module fabrication providing overall high manufacturing process efficiency and repeatability. Optimized Ti/Ni/Au coating layers are developed for metallization as the diffusion barrier and electrode contact layers. The Cu-Sn transient liquid phase sintering technique is utilized for SKD and hH stages, which provides a high strength bonding and very low contact resistance. A remarkably high output power of 38.3 W with a device power density of 2.8 W·cm-2 at a temperature gradient of 513 °C is achieved. These results provide an avenue for widespread utilization of TE technology in waste heat recovery applications.
Subjects
Author keywords
Authors and institutions
- Department of Materials Science and Engineering, Pennsylvania State University, University Park, Pennsylvania16802, United States.
- Electronics and Applied Physics Division, RTI International, Research Triangle Park, North Carolina27709, United States.
ORCID profiles: Wenjie Li, Gagan K Goyal, Subrata Ghosh, Shweta Sharma, Amin Nozariasbmarz, Bed Poudel
Funding
- Defense Advanced Research Projects Agency
- Basic Energy Sciences
- Advanced Research Projects Agency - Energy
- Office of Naval Research
- Army Research Laboratory
- U.S. Army
- National Science Foundation
Cite
APA
Li, W., Goyal, G. K., Stokes, D., Raman, L., Ghosh, S., Sharma, S., Nozariasbmarz, A., Liu, N., Singh, S., Zhang, Y., Poudel, B., & Priya, S. (2023). High-Performance Skutterudite/Half-Heusler Cascaded Thermoelectric Module Using the Transient Liquid Phase Sintering Joining Technique. ACS Applied Materials & Interfaces, 15(2), 2961-2970. https://doi.org/10.1021/acsami.2c19137
Vancouver
Li W, Goyal GK, Stokes D, Raman L, Ghosh S, Sharma S, et al. High-Performance Skutterudite/Half-Heusler Cascaded Thermoelectric Module Using the Transient Liquid Phase Sintering Joining Technique. ACS Applied Materials & Interfaces. 2023;15(2):2961-2970. doi:10.1021/acsami.2c19137
BibTeX
@article{Li2023,
author = {Li, Wenjie and Goyal, Gagan K and Stokes, David and Raman, Lavanya and Ghosh, Subrata and Sharma, Shweta and Nozariasbmarz, Amin and Liu, Na and Singh, Saurabh and Zhang, Yu and Poudel, Bed and Priya, Shashank},
title = {High-Performance Skutterudite/Half-Heusler Cascaded Thermoelectric Module Using the Transient Liquid Phase Sintering Joining Technique},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {2},
pages = {2961--2970},
doi = {10.1021/acsami.2c19137}
}
EUVIMED