Enhanced Organic Thin-Film Transistor Stability by Preventing MoO 3 Diffusion with Metal/MoO 3 /Organic Multilayered Interface Source-Drain Contact
ACS Applied Materials & Interfaces · 2023-01-11 · 15 (1) · 1704-1717
DOI: 10.1021/acsami.2c18780 ↗At a glance
Journal article in ACS Applied Materials & Interfaces, published online on 2022-12-21. Written by Zhenxin Yang and 11 co-authors. Institution: Key Laboratory of Yunnan Provincial Higher Education Institution for Optoelectronics Device Engineering, School of Physics and Astronomy, Yunnan Univ…. Cited 23 times so far (Crossref); 62 references. Funded by: Applied Basic Research Foundation of Yunnan Province, National Natural Science Foundation of China, Key Laboratory of Yunnan Provincial Higher Education Institutions for Optoelectronics Device Engineering.
Abstract (original language)
The source-drain electrode with a MoO3 interfacial modification layer (IML) is considered the most promising method to solve electrical contact issues impeding organic thin-film transistors (OTFTs) from commercialization. However, this method raises many concerns because MoO3 might diffuse into organic materials, which causes device instability. In this work, we observed a significant device stability degradation by damaging on/off switching performance caused by MoO3 diffusion. To prevent the MoO3 diffusion, a source-drain electrode with a multilayered interface contact (MIC) consisting of a top-down stack of metal, MoO3 IML, and organic buffer layer (OBL) is proposed. In the MIC device, the MoO3 IML serves well for its intended functions of reducing contact resistance and suppressing minority carrier injection to the OTFT channel. The inclusion of OBL to the MIC helps block MoO3 diffusion and thereby leads to better device stability and an increased on/off ratio. Through combinations with several organic compounds as a buffer layer, the MoO3 diffusion related electrical behaviors of OTFTs are systematically studied. Key parameters related to MoO3 diffusion such as the Fick coefficient and bias-stress stability such as carrier trapping time are extracted from numerical device analysis. Finally, we summarize a general rule of material selection for making robust source-drain contact.
Subjects
Author keywords
Authors and institutions
- Key Laboratory of Yunnan Provincial Higher Education Institution for Optoelectronics Device Engineering, School of Physics and Astronomy, Yunnan University, Kunming650504, China.
- National Center for International Research on Photoelectric and Energy Materials, Yunnan University, Kunming650504, China.
- Department of Materials Science and Engineering, University of Toronto, TorontoM5S 3E4, Canada.
ORCID profiles: Qiang Zhu, Zheng-Hong Lu
Funding
- Applied Basic Research Foundation of Yunnan Province
- National Natural Science Foundation of China
- Key Laboratory of Yunnan Provincial Higher Education Institutions for Optoelectronics Device Engineering
- Xingdian Talent Plan of Yunnan Province
- Yunnan Provincial Education Office Scientific Research Foundation Project
Cite
APA
Yang, Z., Guo, C., Qin, L., Hu, J. T., Luan, P., Liang, Z., Li, X., Ding, H., Wang, D. K., Zhang, T., Zhu, Q., & Lu, Z. H. (2023). Enhanced Organic Thin-Film Transistor Stability by Preventing MoO 3 Diffusion with Metal/MoO 3 /Organic Multilayered Interface Source-Drain Contact. ACS Applied Materials & Interfaces, 15(1), 1704-1717. https://doi.org/10.1021/acsami.2c18780
Vancouver
Yang Z, Guo C, Qin L, Hu JT, Luan P, Liang Z, et al. Enhanced Organic Thin-Film Transistor Stability by Preventing MoO 3 Diffusion with Metal/MoO 3 /Organic Multilayered Interface Source-Drain Contact. ACS Applied Materials & Interfaces. 2023;15(1):1704-1717. doi:10.1021/acsami.2c18780
BibTeX
@article{Yang2023,
author = {Yang, Zhenxin and Guo, Chunhua and Qin, Lingping and Hu, Jun-Tao and Luan, Pengyan and Liang, Zheng and Li, Xiaoliang and Ding, Huaiyi and Wang, Deng-Ke and Zhang, Tao and Zhu, Qiang and Lu, Zheng-Hong},
title = {Enhanced Organic Thin-Film Transistor Stability by Preventing MoO 3 Diffusion with Metal/MoO 3 /Organic Multilayered Interface Source-Drain Contact},
journal = {ACS Applied Materials & Interfaces},
year = {2023},
volume = {15},
number = {1},
pages = {1704--1717},
doi = {10.1021/acsami.2c18780}
}
EUVIMED