EUVIMEDOpdag EUVIMED
Crossref

Nanoprecipitates to Enhance Radiation Tolerance in High-Entropy Alloys

Boopathy Kombaiah iD, Yufan Zhou, Ke Jin, Anus Manzoor, Jonathan D Poplawsky iD, Jeffery A Aguiar iD, Hongbin Bei, Dilpuneet S Aidhy, Philip D Edmondson, Yanwen Zhang iD

ACS Applied Materials & Interfaces · 2023-01-25 · 15 (3) · 3912-3924

DOI: 10.1021/acsami.2c17540 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-01-09. Written by Boopathy Kombaiah and 9 co-authors. Institution: Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee37831, United States. Cited 52 times so far (Crossref); 70 references. Funded by: Basic Energy Sciences, Laboratory Directed Research and Development.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The growth of advanced energy technologies for power generation is enabled by the design, development, and integration of structural materials that can withstand extreme environments, such as high temperatures, radiation damage, and corrosion. High-entropy alloys (HEAs) are a class of structural materials in which suitable chemical elements in four or more numbers are mixed to typically produce single-phase concentrated solid solution alloys (CSAs). Many of these alloys exhibit good radiation tolerance like limited void swelling and hardening up to relatively medium radiation doses (tens of displacements per atom (dpa)); however, at higher radiation damage levels (>50 dpa), some HEAs suffer from considerable void swelling limiting their near-term acceptance for advanced nuclear reactor concepts. In this study, we developed a HEA containing a high density of Cu-rich nanoprecipitates distributed in the HEA matrix. The Cu-added HEA, NiCoFeCrCu0.12, shows excellent void swelling resistance and negligible radiation-induced hardening upon irradiation up to high radiation doses (i.e., higher than 100 dpa). The void swelling resistance of the alloy is measured to be significantly better than NiCoFeCr CSA and austenitic stainless steels. Density functional theory simulations predict lower vacancy and interstitial formation energies at the coherent interfaces between Cu-rich nanoprecipitates and the HEA matrix. The alloy maintained a high sink strength achieved via nanoprecipitates and the coherent interface with the matrix at a high radiation dose (∼50 dpa). From our experiments and simulations, the effective recombination of radiation-produced vacancies and interstitials at the coherent interfaces of the nanoprecipitates is suggested to be the critical mechanism responsible for the radiation tolerance of the alloy. The materials design strategy based on incorporating a high density of interfaces can be applied to high-entropy alloy systems to improve their radiation tolerance.

Subjects

Author keywords

atom probe tomographydensity functional theoryhardeninghigh-entropy alloysnanoprecipitatesradiationswellingtransmission electron microscopy

Authors and institutions

  • Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, Tennessee37831, United States.
  • Characterization and Post-Irradiation Examination Division, Idaho National Laboratory, Idaho Falls, Idaho83415, United States.
  • Department of Mechanical Engineering, University of Wyoming, Laramie, Wyoming82071, United States.
  • Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, Oak Ridge, Tennessee37831, United States.
  • Nuclear Science and Technology Division, Idaho National Laboratory, Idaho Falls, Idaho83415, United States.
  • School of Materials Science and Engineering, Zhejiang University, Hangzhou310027, China.

ORCID profiles: Boopathy Kombaiah, Jonathan D Poplawsky, Jeffery A Aguiar, Yanwen Zhang

Funding

  • Basic Energy Sciences
  • Laboratory Directed Research and Development

Cite

APA

Kombaiah, B., Zhou, Y., Jin, K., Manzoor, A., Poplawsky, J. D., Aguiar, J. A., Bei, H., Aidhy, D. S., Edmondson, P. D., & Zhang, Y. (2023). Nanoprecipitates to Enhance Radiation Tolerance in High-Entropy Alloys. ACS Applied Materials & Interfaces, 15(3), 3912-3924. https://doi.org/10.1021/acsami.2c17540

Vancouver

Kombaiah B, Zhou Y, Jin K, Manzoor A, Poplawsky JD, Aguiar JA, et al. Nanoprecipitates to Enhance Radiation Tolerance in High-Entropy Alloys. ACS Applied Materials & Interfaces. 2023;15(3):3912-3924. doi:10.1021/acsami.2c17540

BibTeX
@article{Kombaiah2023,
  author = {Kombaiah, Boopathy and Zhou, Yufan and Jin, Ke and Manzoor, Anus and Poplawsky, Jonathan D and Aguiar, Jeffery A and Bei, Hongbin and Aidhy, Dilpuneet S and Edmondson, Philip D and Zhang, Yanwen},
  title = {Nanoprecipitates to Enhance Radiation Tolerance in High-Entropy Alloys},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {3},
  pages = {3912--3924},
  doi = {10.1021/acsami.2c17540}
}
Start for free →