EUVIMEDOpdag EUVIMED
Crossref

Machine Learning for Two-Phase Flow Separation in a Liquid–Liquid Interface Manipulation Separator

Yi-Chieh Chang, Yu-Jen Chen, Po-Ying Chen, Yu-Chieh Chen, Faisal Maqbool, Tsung-Yi Ho, Ya-Yu Chiang iD

ACS Applied Materials & Interfaces · 2023-03-08 · 15 (9) · 12473-12484

DOI: 10.1021/acsami.2c17291 ↗

At a glance

Journal article in ACS Applied Materials & Interfaces, published online on 2023-02-02. Written by Yi-Chieh Chang and 6 co-authors. Institution: Department of Mechanical Engineering, National Chung Hsing University, Taichung40227, Taiwan. Cited 15 times so far (Crossref); 36 references. Funded by: National Chung-Hsing University, Ministry of Science and Technology, Taiwan.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Two-phase flow separation is a key step in various downstream purification processes. The use of a separator with controllable flow behavior is recommended to avoid contamination. In this study, a core-annular separator for biphasic flow separation with four different chemical polarities was developed, and two machine learning-based methods were proposed for answering two emergent questions to meet real industrial needs. (1) Could complete two-phase separation be achieved under these operating conditions? (2) Could the separation process be accelerated by determining the maximum input flow rate of the water? Process prediction for automation, machine learning-based classifiers, and multilayer perceptron were used to address these questions by predicting successful separation and the maximum input flow rates of unknown water-solvent systems with limited experimental data as training samples. The core-annular separator achieved complete two-phase water-solvent separation at a maximum total input flow rate of 4000 μL min-1. Moreover, the classification accuracy for complete separation reached 92.2%, and the multilayer perceptron network had the best performance for predicting the flow rate. This liquid-liquid interface manipulation separator and machine learning method could decrease the cost of relevant process development.

Subjects

Author keywords

classifiersmachine learningmajority-voting algorithmmultilayer perceptronphase separation

Authors and institutions

  • Department of Mechanical Engineering, National Chung Hsing University, Taichung40227, Taiwan.
  • Department of Computer Science, National Tsing Hua University, Hsinchu300044, Taiwan.
  • i-Center for Advanced Science and Technology, National Chung Hsing University, Taichung40227, Taiwan.

ORCID profiles: Ya-Yu Chiang

Funding

  • National Chung-Hsing University
  • Ministry of Science and Technology, Taiwan

Cite

APA

Chang, Y. C., Chen, Y. J., Chen, P. Y., Chen, Y. C., Maqbool, F., Ho, T. Y., & Chiang, Y. Y. (2023). Machine Learning for Two-Phase Flow Separation in a Liquid–Liquid Interface Manipulation Separator. ACS Applied Materials & Interfaces, 15(9), 12473-12484. https://doi.org/10.1021/acsami.2c17291

Vancouver

Chang YC, Chen YJ, Chen PY, Chen YC, Maqbool F, Ho TY, et al. Machine Learning for Two-Phase Flow Separation in a Liquid–Liquid Interface Manipulation Separator. ACS Applied Materials & Interfaces. 2023;15(9):12473-12484. doi:10.1021/acsami.2c17291

BibTeX
@article{Chang2023,
  author = {Chang, Yi-Chieh and Chen, Yu-Jen and Chen, Po-Ying and Chen, Yu-Chieh and Maqbool, Faisal and Ho, Tsung-Yi and Chiang, Ya-Yu},
  title = {Machine Learning for Two-Phase Flow Separation in a Liquid–Liquid Interface Manipulation Separator},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {12473--12484},
  doi = {10.1021/acsami.2c17291}
}
Start for free →