EUVIMEDEUVIMED entdecken
Crossref

Machine Learning for Two-Phase Flow Separation in a Liquid–Liquid Interface Manipulation Separator

Yi-Chieh Chang, Yu-Jen Chen, Po-Ying Chen, Yu-Chieh Chen, Faisal Maqbool, Tsung-Yi Ho, Ya-Yu Chiang iD

ACS Applied Materials & Interfaces · 08.03.2023 · 15 (9) · 12473-12484

DOI: 10.1021/acsami.2c17291 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Materials & Interfaces, online erschienen am 02.02.2023. Verfasst von Yi-Chieh Chang und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, National Chung Hsing University, Taichung40227, Taiwan. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: National Chung-Hsing University, Ministry of Science and Technology, Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Two-phase flow separation is a key step in various downstream purification processes. The use of a separator with controllable flow behavior is recommended to avoid contamination. In this study, a core-annular separator for biphasic flow separation with four different chemical polarities was developed, and two machine learning-based methods were proposed for answering two emergent questions to meet real industrial needs. (1) Could complete two-phase separation be achieved under these operating conditions? (2) Could the separation process be accelerated by determining the maximum input flow rate of the water? Process prediction for automation, machine learning-based classifiers, and multilayer perceptron were used to address these questions by predicting successful separation and the maximum input flow rates of unknown water-solvent systems with limited experimental data as training samples. The core-annular separator achieved complete two-phase water-solvent separation at a maximum total input flow rate of 4000 μL min-1. Moreover, the classification accuracy for complete separation reached 92.2%, and the multilayer perceptron network had the best performance for predicting the flow rate. This liquid-liquid interface manipulation separator and machine learning method could decrease the cost of relevant process development.

Schlagwörter

Stichwörter der Autor:innen

classifiersmachine learningmajority-voting algorithmmultilayer perceptronphase separation

Autor:innen und Institutionen

  • Department of Mechanical Engineering, National Chung Hsing University, Taichung40227, Taiwan.
  • Department of Computer Science, National Tsing Hua University, Hsinchu300044, Taiwan.
  • i-Center for Advanced Science and Technology, National Chung Hsing University, Taichung40227, Taiwan.

ORCID-Profile: Ya-Yu Chiang

Förderung

  • National Chung-Hsing University
  • Ministry of Science and Technology, Taiwan

Zitieren

APA

Chang, Y. C., Chen, Y. J., Chen, P. Y., Chen, Y. C., Maqbool, F., Ho, T. Y., & Chiang, Y. Y. (2023). Machine Learning for Two-Phase Flow Separation in a Liquid–Liquid Interface Manipulation Separator. ACS Applied Materials & Interfaces, 15(9), 12473-12484. https://doi.org/10.1021/acsami.2c17291

Vancouver

Chang YC, Chen YJ, Chen PY, Chen YC, Maqbool F, Ho TY, et al. Machine Learning for Two-Phase Flow Separation in a Liquid–Liquid Interface Manipulation Separator. ACS Applied Materials & Interfaces. 2023;15(9):12473-12484. doi:10.1021/acsami.2c17291

BibTeX
@article{Chang2023,
  author = {Chang, Yi-Chieh and Chen, Yu-Jen and Chen, Po-Ying and Chen, Yu-Chieh and Maqbool, Faisal and Ho, Tsung-Yi and Chiang, Ya-Yu},
  title = {Machine Learning for Two-Phase Flow Separation in a Liquid–Liquid Interface Manipulation Separator},
  journal = {ACS Applied Materials & Interfaces},
  year = {2023},
  volume = {15},
  number = {9},
  pages = {12473--12484},
  doi = {10.1021/acsami.2c17291}
}
Kostenlos starten →