EUVIMEDEUVIMED entdecken
Crossref

Interfacial Engineering of Composite Piezoelectric Fibers Via an Anchor-Chain Architecture

Jun Liu, Qiao Zhou, Pengcheng Zhang, Shuying Hu, Fang Zhou, Shuangshuang Ren, Ting Guo, Leiying Miao

ACS Applied Engineering Materials · 28.08.2026 · 4 (8) · 4367-4379

DOI: 10.1021/acsaenm.6c00645 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 18.06.2026. Verfasst von Jun Liu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: Basic Research Program of Jiangsu Province, National Natural Science Foundation of China, Nanjing Postdoctoral Research Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Composite piezoelectric fibers provide a promising route toward flexible electromechanical devices, yet their engineering performance is often limited by the mechanically fragile inorganic–organic interface. In BaTiO3/poly(l-lactic acid) (PLLA) fibrous membranes, elastic mismatch, weak interfacial adhesion, and nanoparticle aggregation impede stress transfer from the polymer matrix to the piezoelectric ceramic phase, thereby restricting force-to-electricity conversion. Here, we report an anchor-chain interfacial architecture to reinforce this rigid–flexible interface. A polydopamine (PDA) layer serves as an inner anchoring unit on the BaTiO3 surface, while grafted polyethylene glycol (PEG) chains provide steric stabilization and promote topological entanglement with the PLLA matrix. This cooperative interface improves nanoparticle dispersion, and enhances interfacial bonding strength. Consequently, the BaTiO3@PDA@PEG/PLLA membrane exhibits markedly enhanced nanoscale and macroscale piezoelectric responses compared with unmodified BaTiO3/PLLA and BaTiO3@PDA/PLLA membranes. As a device-level demonstration, a 2 × 2 tactile sensor array fabricated from the reinforced fibrous membrane distinguishes tapping, touching, and stroking stimuli through characteristic voltage outputs and spatiotemporal signal patterns. This work provides an engineering-oriented interfacial reinforcement strategy for improving the structural and electromechanical performance of inorganic–organic composite piezoelectric fibers.

Förderung

  • Basic Research Program of Jiangsu Province
  • National Natural Science Foundation of China
  • Nanjing Postdoctoral Research Foundation
  • Scientific Research Program for High-Level Hospital Construction, Nanjing Stomatological Hospital
  • Special Fund for Health Science and Technology Development in Nanjing

Zitieren

APA

Liu, J., Zhou, Q., Zhang, P., Hu, S., Zhou, F., Ren, S., Guo, T., & Miao, L. (2026). Interfacial Engineering of Composite Piezoelectric Fibers Via an Anchor-Chain Architecture. ACS Applied Engineering Materials, 4(8), 4367-4379. https://doi.org/10.1021/acsaenm.6c00645

Vancouver

Liu J, Zhou Q, Zhang P, Hu S, Zhou F, Ren S, et al. Interfacial Engineering of Composite Piezoelectric Fibers Via an Anchor-Chain Architecture. ACS Applied Engineering Materials. 2026;4(8):4367-4379. doi:10.1021/acsaenm.6c00645

BibTeX
@article{Liu2026,
  author = {Liu, Jun and Zhou, Qiao and Zhang, Pengcheng and Hu, Shuying and Zhou, Fang and Ren, Shuangshuang and Guo, Ting and Miao, Leiying},
  title = {Interfacial Engineering of Composite Piezoelectric Fibers Via an Anchor-Chain Architecture},
  journal = {ACS Applied Engineering Materials},
  year = {2026},
  volume = {4},
  number = {8},
  pages = {4367--4379},
  doi = {10.1021/acsaenm.6c00645}
}
Kostenlos starten →