Engineering the Crystalline Architecture for Enhanced Properties in Fast-Rate Processing of Poly(ether ether ketone) (PEEK) Nanocomposites
ACS Applied Engineering Materials · 23.08.2024 · 2 (8) · 2038-2054
DOI: 10.1021/acsaenm.4c00217 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Engineering Materials, online erschienen am 07.08.2024. Verfasst von Behrooz Shirani Bidabadi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Technology and Industrial Distribution, Texas A&M University, College Station, Texas 77843-3367, United States. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Air Force Office of Scientific Research, Division of Civil, Mechanical and Manufacturing Innovation.
Abstract (Originalsprache)
Rapid cooling in fast-rate manufacturing processes such as additive manufacturing and stamp forming limits the development of crystallinity in semicrystalline polymer nanocomposites and, therefore, potential improvements in the mechanical performance. While the nucleation, chain mobility, and crystallization time from rapid cooling are known competing mechanisms in crystallization, herein we elucidate that the crystalline morphology and architecture also play a key role in tuning the mechanical performance. We explore how modifying the spherulite morphology via a cellulose nanocrystal (CNC) and graphene nanoplatelet (GNP) hybrid system in their pristine form can improve or preserve the mechanical properties of poly(ether ether ketone) (PEEK) nanocomposites under two extreme cooling rates (fast -460 °C/min and slow -0.7 °C/min). A scalable manufacturing methodology using water as the medium to disperse the powder system was developed, employing a CNC as a dispersing agent and stabilizer for PEEK and GNP. Despite the expected limited mechanical reinforcement due to thermal degradation, CNCs significantly impacted PEEK's crystalline architecture and mechanical performance, suggesting that surface interactions via lattice matching with PEEK's (200) crystallographic plane play a critical role in engineering the microstructure. In fast cooling, the CNC and CNC:GNP systems reduced the crystallinity, respectively, yet led to minimizing the reduction in the tensile strength and maintaining the tensile modulus at the Neat level in slow cooling. With slow cooling, crystallinity remained relatively unchanged; however, the addition of CNC:GNP improved the strength and modulus by ∼10% and ∼16%, respectively. These findings demonstrate that a hybrid nanomaterial system can tailor PEEK's crystalline microstructure, thus presenting a promising approach for enhancing the mechanical properties of PEEK nanocomposites in fast-rate processes.
Autor:innen und Institutionen
- Department of Engineering Technology and Industrial Distribution, Texas A&M University, College Station, Texas 77843-3367, United States.
- J. Mike Walker '66 Department of Mechanical Engineering, Texas A&M University, College Station, Texas 77843, United States.
- Department of Materials Science and Engineering, Texas A&M University, College Station, Texas 77843, United States.
- Walker Department of Mechanical Engineering, University of Texas at Austin, Austin, Texas 78712-1591, United States.
- Department of Structural Engineering, University of California at San Diego, La Jolla, California 92093, United States.
- Program in Materials Science and Engineering, University of California at San Diego, La Jolla, California 92093,United States.
ORCID-Profile: Emile Motta de Castro, Mia Carrola, Pratik Koirala, Mehran Tehrani, Amir Asadi
Förderung
- Air Force Office of Scientific Research
- Division of Civil, Mechanical and Manufacturing Innovation
Zitieren
APA
Shirani Bidabadi, B., Motta de Castro, E., Carrola, M., Koirala, P., Tehrani, M., & Asadi, A. (2024). Engineering the Crystalline Architecture for Enhanced Properties in Fast-Rate Processing of Poly(ether ether ketone) (PEEK) Nanocomposites. ACS Applied Engineering Materials, 2(8), 2038-2054. https://doi.org/10.1021/acsaenm.4c00217
Vancouver
Shirani Bidabadi B, Motta de Castro E, Carrola M, Koirala P, Tehrani M, Asadi A. Engineering the Crystalline Architecture for Enhanced Properties in Fast-Rate Processing of Poly(ether ether ketone) (PEEK) Nanocomposites. ACS Applied Engineering Materials. 2024;2(8):2038-2054. doi:10.1021/acsaenm.4c00217
BibTeX
@article{ShiraniBidabadi2024,
author = {Shirani Bidabadi, Behrooz and Motta de Castro, Emile and Carrola, Mia and Koirala, Pratik and Tehrani, Mehran and Asadi, Amir},
title = {Engineering the Crystalline Architecture for Enhanced Properties in Fast-Rate Processing of Poly(ether ether ketone) (PEEK) Nanocomposites},
journal = {ACS Applied Engineering Materials},
year = {2024},
volume = {2},
number = {8},
pages = {2038--2054},
doi = {10.1021/acsaenm.4c00217}
}
EUVIMED