Tuning Diamine Architecture in 6FDA-Based Polyimides for Enhanced High-Temperature Capacitive Energy Storage
ACS Applied Energy Materials · 31.10.2026
DOI: 10.1021/acsaem.6c02261 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 31.10.2026. Verfasst von Xinyu Zhao und 7 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Gefördert von: Pakistan Science Foundation, Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization, Guangdong S&T program.
Abstract (Originalsprache)
Fluorinated polyimides (6FDA-based polyimides) were investigated as high-temperature dielectric materials for capacitive energy storage. This study synthesizes a series of 6FDA-based polyimide films via solution polymerization by modulating diamine monomers with distinct spatial configurations and segmental stiffness. Systematic investigations reveal that incorporating high-rigidity diamine monomers increases the glass-transition temperature (Tg) to 340.41 °C and enhances chain packing density, as evidenced by a reduction in d-spacing to 3.87 Å. Density functional theory calculations further revealed that PI-BP possesses the largest LUMO-HOMO energy gap of 3.423 eV among the three PIs, suggesting a relatively high energetic barrier for electronic excitation. Benefiting from these structural and electronic characteristics, PI-BP exhibited a breakdown strength of 800 MV/m and a discharged energy density of 7.04 J/cm3 at room temperature. At 150 °C, PI-BP maintained a breakdown strength of 600 MV/m and an energy-storage efficiency of 85.7%, whereas commercial Kapton PI exhibited only 300 MV/m and 20.3% under the same conditions. Moreover, after 106 charge-discharge cycles at 150 °C and 200 MV/m, the variations in discharged energy density and efficiency were limited to 1.8 and 1.5%, respectively. These results demonstrate that tailoring the diamine architecture provides an effective molecular-design strategy for simultaneously regulating chain packing, electronic structure, and high-temperature capacitive energy-storage performance in fluorinated polyimides.
Förderung
- Pakistan Science Foundation
- Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization
- Guangdong S&T program
- Guangdong Basic and Applied Basic Research Foundation
- National Natural Science Foundation of China (NSFC)
- Science and Technology Innovation Base (Platform) Program of Hubei Province
Zitieren
APA
Zhao, X., Zhong, W., Jia, J., Tran, N., Marwat, M. A., Zhang, L., Tan, H., & Zhang, H. (2026). Tuning Diamine Architecture in 6FDA-Based Polyimides for Enhanced High-Temperature Capacitive Energy Storage. ACS Applied Energy Materials. https://doi.org/10.1021/acsaem.6c02261
Vancouver
Zhao X, Zhong W, Jia J, Tran N, Marwat MA, Zhang L, et al. Tuning Diamine Architecture in 6FDA-Based Polyimides for Enhanced High-Temperature Capacitive Energy Storage. ACS Applied Energy Materials. 2026. doi:10.1021/acsaem.6c02261
BibTeX
@article{Zhao2026,
author = {Zhao, Xinyu and Zhong, Wentao and Jia, Junxiang and Tran, Nguyen-Minh-An and Marwat, Mohsin Ali and Zhang, Le and Tan, Hua and Zhang, Haibo},
title = {Tuning Diamine Architecture in 6FDA-Based Polyimides for Enhanced High-Temperature Capacitive Energy Storage},
journal = {ACS Applied Energy Materials},
year = {2026},
doi = {10.1021/acsaem.6c02261}
}
EUVIMED