Ultrahigh High‐temperature Capacitive Energy Storage Via Proton Irradiation
Advanced Science · 2026-02 · 13 (9)
DOI: 10.1002/advs.202522035 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 30.11.2025. Verfasst von Chenyi Li und 11 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science a…. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangdong Basic and Applied Basic Research Foundation, Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization.
Abstract (Originalsprache)
Polymer‐based film capacitors with ultrafast rates are extensively used in modern electronics and electric power systems. Dielectric polymers typically exhibit a low dielectric constant, while their energy density at elevated temperatures is limited by drastically increased conduction. To address this challenge, it is reported that proton irradiation enables concurrently enhanced dielectric constant and energy storage properties at high temperatures. The combined atomic force microscopy‐infrared spectroscopy and first‐principles calculations reveal that proton irradiation facilitates local rotation of ether bonds in aromatic polymers, producing greatly increased local polar states leading to markedly improved polarizability while preserving dense chain packing. Consequently, an ultrahigh discharged energy density of 6.9 J cm −3 with an efficiency > 95% is achieved in irradiated poly(ether imide) at 150 °C, exceeding current dielectric polymers and nanocomposites. The results suggest an alternative postprocessing method toward rational design of high‐performance dielectrics for capacitive energy storage.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Material Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, Hubei, 430074, China.
- Guangdong HUST Industrial Technology Research Institute, Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization, Dongguan, Guangdong, 523808, China.
- Department of Chemical Engineering and Materials Research Institute, Pennsylvania State University, University Park, PA, 16802, USA.
- RICOTON Technology Co., Ltd., Xiangxiang, Hunan, 411400, China.
ORCID-Profile: Yang Liu
Förderung
- National Natural Science Foundation of China
- Guangdong Basic and Applied Basic Research Foundation
- Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Li, C., Gao, H., Gong, Y., Lin, Y. T., Liu, Y., Wang, Y., Chen, L., Wu, H., Cheng, L., Li, Y., Liu, Y., & Zhou, H. (2026). Ultrahigh High‐temperature Capacitive Energy Storage Via Proton Irradiation. Advanced Science, 13(9). https://doi.org/10.1002/advs.202522035
Vancouver
Li C, Gao H, Gong Y, Lin YT, Liu Y, Wang Y, et al. Ultrahigh High‐temperature Capacitive Energy Storage Via Proton Irradiation. Advanced Science. 2026;13(9). doi:10.1002/advs.202522035
BibTeX
@article{Li2026,
author = {Li, Chenyi and Gao, Hanxiao and Gong, Yutie and Lin, Yen-Ting and Liu, Yuquan and Wang, Yuanqi and Chen, Lan and Wu, Hangyao and Cheng, Ling and Li, Yang and Liu, Yang and Zhou, Huamin},
title = {Ultrahigh High‐temperature Capacitive Energy Storage Via Proton Irradiation},
journal = {Advanced Science},
year = {2026},
volume = {13},
number = {9},
doi = {10.1002/advs.202522035}
}
EUVIMED