Constructing Ceramic–Polymer Composite Electrolytes via In Situ Polymerization Strategy for High Safety Solid-State Lithium Metal Batteries
ACS Applied Energy Materials · 10.08.2026 · 9 (15) · 10279-10290
DOI: 10.1021/acsaem.6c01840 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 23.07.2026. Verfasst von Shuaifeng Sun und 10 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Huzhou Municipal Science and Technology Bureau, Anhui Provincial Department of Education.
Abstract (Originalsprache)
Solid-state electrolytes have attracted considerable attention for application in next-generation solid-state lithium metal batteries (SLMBs). However, the intrinsic single-component solid-state electrolytes have seriously hindered the development of SLMBs by conflicting requirements for ionic conductivity, interfacial compatibility, mechanical robustness, and electrochemical stability. Herein, we report a ceramic–polymer (LATP@PP@PDOL) composite electrolyte via an in situ polymerization strategy, where a ceramic-coated (LATP@PP) membrane was used as a supporting base. The LATP@PP scaffold provided structural integrity and dendrite-suppressing rigidity, while the in-situ-formed poly(1,3-dioxolane) uniformly infiltrated pore networks and conformed to electrode–electrolyte interfaces, thereby eliminating interfacial voids and enhancing Li+ transport kinetics. This dual-phase architecture ensured dimensional stability, improved interfacial contact, and synergistic ion-conduction pathways. Thus, the designed ceramic–polymer composite electrolyte achieved a room-temperature ionic conductivity of 0.51 mS cm–1, a lithium-ion transference number of 0.82, and an electrochemical stability window of 4.75 V. When integrated into a Li||LiFePO4 solid-state battery, it delivered exceptional capacity retention of 97.2% after 200 cycles at 0.2C. Even at 2C, it could also provide the high reversible capacity of 134 mAh g–1 after 400 cycles with 82% capacity retention. These results verified that the above ceramic–polymer composite electrolyte combining ceramic components with in situ polymerization of poly(1,3-dioxolane) can effectively and synergistically enhance the comprehensive performance of solid-state electrolytes, providing an idea for the development of composite electrolytes and promoting the application of ceramic-coated membranes from liquid batteries to safer SLMBs.
Förderung
- National Natural Science Foundation of China
- Huzhou Municipal Science and Technology Bureau
- Anhui Provincial Department of Education
- Anhui Provincial Department of Science and Technology
- Key Scientific Research Project of Colleges and Universities in Henan Province
- Huainan Normal University
Zitieren
APA
Sun, S., Niu, S., Wei, X., Chen, K., Li, L., Zhang, F., Zheng, C., Xu, X., Li, Y., Yang, S., & Zhou, L. (2026). Constructing Ceramic–Polymer Composite Electrolytes via In Situ Polymerization Strategy for High Safety Solid-State Lithium Metal Batteries. ACS Applied Energy Materials, 9(15), 10279-10290. https://doi.org/10.1021/acsaem.6c01840
Vancouver
Sun S, Niu S, Wei X, Chen K, Li L, Zhang F, et al. Constructing Ceramic–Polymer Composite Electrolytes via In Situ Polymerization Strategy for High Safety Solid-State Lithium Metal Batteries. ACS Applied Energy Materials. 2026;9(15):10279-10290. doi:10.1021/acsaem.6c01840
BibTeX
@article{Sun2026,
author = {Sun, Shuaifeng and Niu, Shaochuang and Wei, Xin and Chen, Kai and Li, Li and Zhang, Furong and Zheng, Chaoyue and Xu, Xinliang and Li, Yun and Yang, Shiliu and Zhou, Lei},
title = {Constructing Ceramic–Polymer Composite Electrolytes via In Situ Polymerization Strategy for High Safety Solid-State Lithium Metal Batteries},
journal = {ACS Applied Energy Materials},
year = {2026},
volume = {9},
number = {15},
pages = {10279--10290},
doi = {10.1021/acsaem.6c01840}
}
EUVIMED