EUVIMEDEUVIMED entdecken
Crossref

In Situ Hybrid Crosslinking Polymerization of Nanoparticles for Composite Polymer Electrolytes to Achieve Highly‐Stable Solid Lithium–Metal Batteries

Kexin Mu, Weiliang Dong, Weijian Xu, Zhennuo Song, Ruixue Wang, Liuyishun Wu, Hong Li, Qiang Liu, Caizhen Zhu, Jian Xu, Lei Tian

Advanced Functional Materials · 2024-11 · 34 (45)

DOI: 10.1002/adfm.202405969 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 03.06.2024. Verfasst von Kexin Mu und 10 weiteren Autor:innen. Die Arbeit wurde bisher 83-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The composite solid electrolyte, which combines the advantages of inorganic conductors and organic polymer electrolytes, has become a crucial strategy for the construction of solid‐state batteries. However, the physical deposition and agglomeration of traditional composite fillers seriously affect their structural uniformity and ion transport performance, and the construction of uniform and stable composite electrolytes is still an insurmountable challenge. Herein, a strategy of in situ hybrid crosslinking polymerization of TiO 2 nanoparticles is proposed for highly stable polymer composite electrolytes (NHCPE) with an ultrahigh ionic conductivity of 1.74 × 10 −3 S cm −1 at 25 °C, and a high lithium‐ion transference number of 0.725. These properties enable the composed lithium symmetric battery to be stably deposited/plating off at 0.5 mA cm −2 for more than 1000 h. Moreover, the assembled LFP|PDOL@nanoTiO 2 |Li battery exhibits a superior specific discharge capacity of 142.6 mAh g −1 at 1 C and 25 °C, and an ultrahigh capacity retention rate of 90% after 1000 cycles. The proposed PDOL@nanoTiO 2 NHCPE greatly inhibits the defects of easy agglomeration of composite electrolytes, solves the problems of easy decomposition, low thermal stability, and poor safety of polyether electrolytes, and opens up a new way for the design and industrial application of high‐stability composite polymer electrolytes.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Mu, K., Dong, W., Xu, W., Song, Z., Wang, R., Wu, L., Li, H., Liu, Q., Zhu, C., Xu, J., & Tian, L. (2024). In Situ Hybrid Crosslinking Polymerization of Nanoparticles for Composite Polymer Electrolytes to Achieve Highly‐Stable Solid Lithium–Metal Batteries. Advanced Functional Materials, 34(45). https://doi.org/10.1002/adfm.202405969

Vancouver

Mu K, Dong W, Xu W, Song Z, Wang R, Wu L, et al. In Situ Hybrid Crosslinking Polymerization of Nanoparticles for Composite Polymer Electrolytes to Achieve Highly‐Stable Solid Lithium–Metal Batteries. Advanced Functional Materials. 2024;34(45). doi:10.1002/adfm.202405969

BibTeX
@article{Mu2024,
  author = {Mu, Kexin and Dong, Weiliang and Xu, Weijian and Song, Zhennuo and Wang, Ruixue and Wu, Liuyishun and Li, Hong and Liu, Qiang and Zhu, Caizhen and Xu, Jian and Tian, Lei},
  title = {In Situ Hybrid Crosslinking Polymerization of Nanoparticles for Composite Polymer Electrolytes to Achieve Highly‐Stable Solid Lithium–Metal Batteries},
  journal = {Advanced Functional Materials},
  year = {2024},
  volume = {34},
  number = {45},
  doi = {10.1002/adfm.202405969}
}
Kostenlos starten →