EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Step-by-Step Design Strategy to Realize High-Performance Lithium–Sulfur Batteries

Matthew J Dent, Sean Grabe, Steven J Hinder, Mateus G Masteghin iD, James D Whiting, John F Watts, Constantina Lekakou iD

ACS Applied Energy Materials · 10.02.2025 · 8 (3) · 1492-1506

DOI: 10.1021/acsaem.4c02457 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 28.01.2025. Verfasst von Matthew J Dent und 6 weiteren Autor:innen. Beteiligte Einrichtung: Centre for Engineering Materials, Faculty of Engineering and Physical Sciences, University of Surrey, Guildford GU2 7XH, U.K. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Faraday Institution.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to increase the energy density and improve the cyclability of lithium-sulfur (Li-S) batteries, a combined strategy is devised and evaluated for high-performance Li-S batteries. It consists of the following steps to reduce the loss of active sulfur and sulfides migrating in the liquid electrolyte to the anode and add electrocatalyst groups in the cathode or catholyte: (i) A hollow porous nanoparticle coating cathode host with a pseudocapacitive PEDOT:PSS binder that also contributes to trapping polysulfides. (ii) A thin interlayer of B-N-graphene (BNG) nanoplatelets on the above cathode trapping polysulfides while participating in the electron transfer and acting as an electrocatalyst, thus ensuring that the trapped sulfides remain active in the cathode. (iii) Added semiconductor phthalocyanine VOPc or CoPc to form an electrocatalyst network in the catholyte, trapping polysulfides and promoting their redox reactions with Li+ ions. (iv) Added silk fibroin in the liquid electrolyte, which also suppresses dendritic growth on the lithium anode. This strategy is evaluated step-by-step in Li-S battery cells characterized experimentally and in simulations based on a multipore continuum physicochemical model with adsorption energy data supplied from molecular dynamics simulations. The thin BNG interlayer sprayed on the cathode proved a decisive factor in improving cell performance in all cases. A Li-S cell combining features from (i), (ii), and (iv) and with 45 wt % S in the cathode yields 1372 mAh gS -1 at first discharge and 920 mAh gS -1 at the 100th discharge after a cycling schedule at different C-rates. A Li-S cell combining features from (i), (ii), and (iii) and with 55 wt % S in the cathode yields 805 and 586 mAh gS -1 at the first and the 100th discharge, respectively.

Autor:innen und Institutionen

  • Centre for Engineering Materials, Faculty of Engineering and Physical Sciences, University of Surrey, Guildford GU2 7XH, U.K.

ORCID-Profile: Mateus G Masteghin, Constantina Lekakou

Förderung

  • Faraday Institution

Zitieren

APA

Dent, M. J., Grabe, S., Hinder, S. J., Masteghin, M. G., Whiting, J. D., Watts, J. F., & Lekakou, C. (2025). A Step-by-Step Design Strategy to Realize High-Performance Lithium–Sulfur Batteries. ACS Applied Energy Materials, 8(3), 1492-1506. https://doi.org/10.1021/acsaem.4c02457

Vancouver

Dent MJ, Grabe S, Hinder SJ, Masteghin MG, Whiting JD, Watts JF, et al. A Step-by-Step Design Strategy to Realize High-Performance Lithium–Sulfur Batteries. ACS Applied Energy Materials. 2025;8(3):1492-1506. doi:10.1021/acsaem.4c02457

BibTeX
@article{Dent2025,
  author = {Dent, Matthew J and Grabe, Sean and Hinder, Steven J and Masteghin, Mateus G and Whiting, James D and Watts, John F and Lekakou, Constantina},
  title = {A Step-by-Step Design Strategy to Realize High-Performance Lithium–Sulfur Batteries},
  journal = {ACS Applied Energy Materials},
  year = {2025},
  volume = {8},
  number = {3},
  pages = {1492--1506},
  doi = {10.1021/acsaem.4c02457}
}
Kostenlos starten →