EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Self-Assembled Molecules for Hole-Selective Electrodes in Highly Stable and Efficient Inverted Perovskite Solar Cells with Ultralow Energy Loss

Wenhui Li, Michele Cariello, Maria Méndez iD, Graeme Cooke iD, Emilio Palomares iD

ACS Applied Energy Materials · 13.02.2023 · 6 (3) · 1239-1247

DOI: 10.1021/acsaem.2c02880 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Energy Materials, online erschienen am 13.01.2023. Verfasst von Wenhui Li und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Chemical Research of Catalonia (ICIQ-BIST), Avda. Països Catalans, 16, 43007Tarragona, Spain. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Ministerio de Econom?a y Competitividad, Institut Catal? d'Investigaci? Qu?mica.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Good selective contacts are necessary for solar cells that are efficient and have long-term stability. Since 1998, with the advent of solid-state dye sensitized solar cells (DSSC), Spiro-OMeTAD has become the reference hole-transporting material. Yet, for efficient solar cells Spiro-OMeTAD must be partially oxidized with chemical dopants, which compromises the long-term stability of the solar cell. Alternatively, semiconductor polymers such as PTAA have been also studied, matching or improving the solar cell characteristics. However, PTAA-based devices lack long-term stability. Moreover, both Spiro-OMeTAD and PTAA are expensive materials to synthesize. Hence, approaches toward increasing the solar cell stability without compromising the device efficiency and decreasing the manufacturing cost are very desirable. In this work we have modified Spiro-OMeTAD, by an easy-to-use methodology, by introducing a carboxylic acid anchoring group (Spiro-Acid), thereby allowing the formation of self-assembled monolayers (SAMs) of the hole-transporting material in dopant-free p-i-n hybrid perovskite solar cells (iPSCs). The resulting device showed a champion efficiency of 18.15% with ultralow energy loss, which is the highest efficiency among Spiro-OMeTAD-based iPSCs, and a remarkable fill factor of over 82%, as well as excellent long-term illumination stability. Charge transfer and charge carrier dynamics are studied by using advanced transient techniques to understand the interfacial kinetics. Our results demonstrate that the Spiro-OMeTAD-based SAMs have a great potential in producing low-cost iPSC devices, due to lower material usage, good long-term stability, and high performance.

Autor:innen und Institutionen

  • Institute of Chemical Research of Catalonia (ICIQ-BIST), Avda. Països Catalans, 16, 43007Tarragona, Spain.
  • School of Chemistry, University of Glasgow, GlasgowG12 8QQ, U.K.
  • Catalan Institution for Research and Advanced Studies (ICREA), 08010Barcelona, Spain.

ORCID-Profile: Maria Méndez, Graeme Cooke, Emilio Palomares

Förderung

  • Engineering and Physical Sciences Research Council
  • Ministerio de Econom?a y Competitividad
  • Institut Catal? d'Investigaci? Qu?mica
  • Centres de Recerca de Catalunya
  • Instituci? Catalana de Recerca i Estudis Avan?ats

Zitieren

APA

Li, W., Cariello, M., Méndez, M., Cooke, G., & Palomares, E. (2023). Self-Assembled Molecules for Hole-Selective Electrodes in Highly Stable and Efficient Inverted Perovskite Solar Cells with Ultralow Energy Loss. ACS Applied Energy Materials, 6(3), 1239-1247. https://doi.org/10.1021/acsaem.2c02880

Vancouver

Li W, Cariello M, Méndez M, Cooke G, Palomares E. Self-Assembled Molecules for Hole-Selective Electrodes in Highly Stable and Efficient Inverted Perovskite Solar Cells with Ultralow Energy Loss. ACS Applied Energy Materials. 2023;6(3):1239-1247. doi:10.1021/acsaem.2c02880

BibTeX
@article{Li2023,
  author = {Li, Wenhui and Cariello, Michele and Méndez, Maria and Cooke, Graeme and Palomares, Emilio},
  title = {Self-Assembled Molecules for Hole-Selective Electrodes in Highly Stable and Efficient Inverted Perovskite Solar Cells with Ultralow Energy Loss},
  journal = {ACS Applied Energy Materials},
  year = {2023},
  volume = {6},
  number = {3},
  pages = {1239--1247},
  doi = {10.1021/acsaem.2c02880}
}
Kostenlos starten →