EUVIMEDEUVIMED entdecken
Crossref

Flexible and Cost-Effective Graphene-Coated Textile-Based Piezoresistive Pressure Sensor on a Paper Substrate for Human Motion Detection and Human−Machine Interfaces

Rajnandan Lahkar, Ipshita Baruah, Hemen Kalita

ACS Applied Electronic Materials · 28.07.2026 · 8 (14) · 5915-5927

DOI: 10.1021/acsaelm.6c00713 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Electronic Materials, online erschienen am 06.07.2026. Verfasst von Rajnandan Lahkar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: Department of Science and Technology, Ministry of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The development of mechanically robust graphene-textile-based pressure sensors remains challenging due to poor adhesion between graphene-based conductive coatings and textile substrates. It often leads to coating delamination, degradation of conductive pathways, and unstable sensing performance under repeated mechanical deformation. Herein, we report a flexible piezoresistive pressure sensor based on a silk sericin (SS)-assisted reduced graphene oxide-coated textile (RGSC) integrated with graphite interdigitated electrodes fabricated on a paper substrate. Unlike conventional synthetic coupling agents, SS serves as a naturally derived bioadhesive interfacial layer that promotes strong interactions between graphene oxide (GO) and textile fibers, enabling enhanced coating adhesion and long-term stability. Fourier transform infrared spectroscopy confirms the formation of intermolecular interactions between sericin and GO, while washing durability and tape-peel tests demonstrate significantly improved coating retention. The sensor exhibits a wide pressure-sensing range of 0−250 kPa with sensitivities of 1.13 and 0.11 kPa−1 in the low- and high-pressure regions, respectively. It also has a low detection limit, low hysteresis, rapid response, excellent repeatability, and robust mechanical durability under repeated bending and cyclic loading. To validate the sensing mechanism, compressive strain analysis, microscopy-assisted structural deformation studies, and equivalent circuit modeling are performed. The results reveal that the sensor response originates from the pressure-induced densification of the conductive textile network and modulation of interfiber and sensing layer−electrode contact resistances. Furthermore, the developed sensor successfully demonstrated wearable monitoring of human motion and physiological signals while also exhibiting compatibility with wireless sensing platforms. This work introduces a bioderived interfacial method for robust graphene integration onto textile substrates and provides a promising route toward mechanically durable and environmentally responsible wearable pressure-sensing systems.

Förderung

  • Department of Science and Technology, Ministry of Science and Technology

Zitieren

APA

Lahkar, R., Baruah, I., & Kalita, H. (2026). Flexible and Cost-Effective Graphene-Coated Textile-Based Piezoresistive Pressure Sensor on a Paper Substrate for Human Motion Detection and Human−Machine Interfaces. ACS Applied Electronic Materials, 8(14), 5915-5927. https://doi.org/10.1021/acsaelm.6c00713

Vancouver

Lahkar R, Baruah I, Kalita H. Flexible and Cost-Effective Graphene-Coated Textile-Based Piezoresistive Pressure Sensor on a Paper Substrate for Human Motion Detection and Human−Machine Interfaces. ACS Applied Electronic Materials. 2026;8(14):5915-5927. doi:10.1021/acsaelm.6c00713

BibTeX
@article{Lahkar2026,
  author = {Lahkar, Rajnandan and Baruah, Ipshita and Kalita, Hemen},
  title = {Flexible and Cost-Effective Graphene-Coated Textile-Based Piezoresistive Pressure Sensor on a Paper Substrate for Human Motion Detection and Human−Machine Interfaces},
  journal = {ACS Applied Electronic Materials},
  year = {2026},
  volume = {8},
  number = {14},
  pages = {5915--5927},
  doi = {10.1021/acsaelm.6c00713}
}
Kostenlos starten →