EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reactive Multifunctional Ink for Hydrogel Fabrication and Cell-Laden 3D Printing via Incorporation of Strontium-Doped Bioactive Glass

Aasma Sapkota, Natalie Crutchfield, Ethan Renken, Alexander Bruckmann iD, Daniele M Catori, Hitesh Handa iD, Elizabeth J Brisbois iD

ACS Applied Bio Materials · 2026

DOI: 10.1021/acsabm.6c00608 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Bio Materials, 2026. Verfasst von Aasma Sapkota und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical, Materials, & Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States. Hauptthemen laut MEDLINE: Strontium, Hydrogels, Printing, Three-Dimensional, Biocompatible Materials. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Heart, Lung, and Blood Institute.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Kein Abstract verfügbar.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

StrontiumHydrogelsPrinting, Three-DimensionalBiocompatible MaterialsInkGlassAnti-Bacterial AgentsMaterials TestingAnimalsOsteoblastsCell ProliferationParticle SizeTissue ScaffoldsHumansEscherichia coli

Stichwörter der Autor:innen

3D bioprintingantibacterialhydrogelosteoblaststrontium

Substanzen

StrontiumHydrogelsBiocompatible MaterialsAnti-Bacterial Agents

Autor:innen und Institutionen

  • School of Chemical, Materials, & Biomedical Engineering, College of Engineering, University of Georgia, Athens, Georgia 30602, United States.
  • Pharmaceutical and Biomedical Sciences Department, College of Pharmacy, University of Georgia, Athens, Georgia 30602, United States.

ORCID-Profile: Alexander Bruckmann, Hitesh Handa, Elizabeth J Brisbois

Förderung

  • National Heart, Lung, and Blood Institute

Zitieren

APA

Sapkota, A., Crutchfield, N., Renken, E., Bruckmann, A., Catori, D. M., Handa, H., & Brisbois, E. J. (2026). Reactive Multifunctional Ink for Hydrogel Fabrication and Cell-Laden 3D Printing via Incorporation of Strontium-Doped Bioactive Glass. ACS Applied Bio Materials. https://doi.org/10.1021/acsabm.6c00608

Vancouver

Sapkota A, Crutchfield N, Renken E, Bruckmann A, Catori DM, Handa H, et al. Reactive Multifunctional Ink for Hydrogel Fabrication and Cell-Laden 3D Printing via Incorporation of Strontium-Doped Bioactive Glass. ACS Applied Bio Materials. 2026. doi:10.1021/acsabm.6c00608

BibTeX
@article{Sapkota2026,
  author = {Sapkota, Aasma and Crutchfield, Natalie and Renken, Ethan and Bruckmann, Alexander and Catori, Daniele M and Handa, Hitesh and Brisbois, Elizabeth J},
  title = {Reactive Multifunctional Ink for Hydrogel Fabrication and Cell-Laden 3D Printing via Incorporation of Strontium-Doped Bioactive Glass},
  journal = {ACS Applied Bio Materials},
  year = {2026},
  doi = {10.1021/acsabm.6c00608}
}
Kostenlos starten →