EUVIMEDEUVIMED entdecken
Crossref

3D Bioprintable Gt‐Alg‐MMT Nano Bioink for Cartilage Tissue Engineering

Xiaofang Wu iD, Kai Chen, Qin Chen, Xinyue Zhang, Cunao Feng, Xiaowei Li, Dekun Zhang

Macromolecular Bioscience · 2025

DOI: 10.1002/mabi.202500167 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecular Bioscience, 2025. Verfasst von Xiaofang Wu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechatronic Engineering, Anhui University of Science and Technology, Huainan, China. Hauptthemen laut MEDLINE: Tissue Engineering, Printing, Three-Dimensional, Alginates, Cartilage, Articular. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Natural Science Research Project of Anhui Educational Committee, Anhui Provincial Natural Science Foundation, Medical Special Cultivation Project of Anhui University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Damage to articular cartilage is irreversible, and its self‐healing ability is minimal. The construction of articular cartilage in tissue engineering requires suitable biomaterials as scaffolds to provide a 3D natural microenvironment for the development and growth of articular cartilage. This study aims to explore the feasibility of Gt‐Alg‐MMT (gelatin/sodium alginate/montmorillonite) nanocomposite hydrogel as a 3D printing bioink and its applicability in 3D printing cartilage scaffolds. The optimization results showed that the bioink with the ratio of 2Gt‐5Alg‐5MMT had the best 3D printability and mechanical strength, and the optimal 3D printing pressure and printing speed were 0.29 MPa and 2.5 mm/s, respectively. The performance test showed that the 3D printed 2Gt‐5Alg‐5MMT scaffold has a honeycomb porous network structure, with porosity and water content of more than 90%, static compressive elastic modulus of 125 ± 9.6 kPa, hysteresis of cyclic compression of 60%–80%, and has viscoelasticity, structural stability, and thermal stability close to cartilage tissue in three scanning modes of dynamic strain, dynamic frequency, and dynamic temperature. In addition, Live/Dead staining experiments showed that the 2Gt‐5Alg‐5MMT scaffold has excellent biocompatibility with ADTC5 cells. Therefore, this 3D‐printed 2Gt‐5Alg‐5MMT scaffold is expected to be a candidate material for promoting articular cartilage regeneration.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Tissue EngineeringPrinting, Three-DimensionalAlginatesCartilage, ArticularBioprintingNanocompositesInkTissue ScaffoldsAnimalsGelatinHumansBiocompatible MaterialsHydrogelsCell Line

Stichwörter der Autor:innen

3D printingcartilage scaffoldgelatin‐sodium alginate‐montmorillonitenano bioink

Substanzen

AlginatesGelatinBiocompatible MaterialsHydrogels

Autor:innen und Institutionen

  • School of Mechatronic Engineering, Anhui University of Science and Technology, Huainan, China.
  • School of Materials Science and Physics, China University of Mining and Technology, Xuzhou, China.

ORCID-Profile: Xiaofang Wu

Förderung

  • Natural Science Research Project of Anhui Educational Committee
  • Anhui Provincial Natural Science Foundation
  • Medical Special Cultivation Project of Anhui University of Science and Technology
  • Jiangsu Provincial Key Research and Development Program
  • Natural Science Foundation of Anhui Province

Zitieren

APA

Wu, X., Chen, K., Chen, Q., Zhang, X., Feng, C., Li, X., & Zhang, D. (2025). 3D Bioprintable Gt‐Alg‐MMT Nano Bioink for Cartilage Tissue Engineering. Macromolecular Bioscience. https://doi.org/10.1002/mabi.202500167

Vancouver

Wu X, Chen K, Chen Q, Zhang X, Feng C, Li X, et al. 3D Bioprintable Gt‐Alg‐MMT Nano Bioink for Cartilage Tissue Engineering. Macromolecular Bioscience. 2025. doi:10.1002/mabi.202500167

BibTeX
@article{Wu2025,
  author = {Wu, Xiaofang and Chen, Kai and Chen, Qin and Zhang, Xinyue and Feng, Cunao and Li, Xiaowei and Zhang, Dekun},
  title = {3D Bioprintable Gt‐Alg‐MMT Nano Bioink for Cartilage Tissue Engineering},
  journal = {Macromolecular Bioscience},
  year = {2025},
  doi = {10.1002/mabi.202500167}
}
Kostenlos starten →