EUVIMEDEUVIMED entdecken
Crossref

3D Printed HA/β-TCP Scaffold: A Macroscopic Microscopic Analysis and Biological Validation Study of the Effect of the Component Ratio on Performance

Zhitao Yin, Yutong Chen, Guang Yang, Shuaishuai Wang, Bingbing Wang, Kefeng Wang, Shun Zhang, Xujing Zhang, Yanen Wang, Yan Xu iD

ACS Applied Bio Materials · 17.11.2025 · 8 (11) · 9807-9823

DOI: 10.1021/acsabm.5c01082 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Bio Materials, online erschienen am 14.10.2025. Verfasst von Zhitao Yin und 9 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical Engineering, Xinjiang University, Urumqi 830017, China. Hauptthemen laut MEDLINE: Calcium Phosphates, Printing, Three-Dimensional, Durapatite, Tissue Scaffolds. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The component ratio of a material is the key factor determining the quality of three-dimensional (3D)-printed scaffolds. This study aimed to investigate the basic properties of hydroxyapatite (HA)/β-tricalcium phosphate (β-TCP) scaffold material with poly(vinyl alcohol) (PVA) as a binder. The interfacial binding energies, bonding behaviors, and mechanical characteristics of the materials were investigated by molecular dynamics simulation (MD), and it was found that the types of functional groups and the molar occupancy of elements affected the interfacial binding behaviors of the materials. Moreover, the properties of the slurry and structural characteristics of the scaffolds at different HA/β-TCP component ratios were analyzed. The variation in the shear-thinning capacity of the slurry was explained by investigating the zeta potential, solid content, and interfacial binding energy of the materials. The basic properties of the material were not the only factors determining the mechanical properties of scaffolds; the pore and bonding characteristics, and the interfacial binding energy of the material together determine the mechanical properties of scaffolds. These analyses elucidated the impact of the component ratio on the scaffolds from both microscopic and macroscopic perspectives. Finally, the biological characterization study of the material was verified by in vitro simulation experiments, and it was found that scaffolds containing β-TCP demonstrated relatively better performance in supporting bone tissue formation compared with β-TCP-free controls. This research provides a theoretical foundation for the selection and optimization of material combinations in 3D printing applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Calcium PhosphatesPrinting, Three-DimensionalDurapatiteTissue ScaffoldsBiocompatible MaterialsMaterials TestingMolecular Dynamics SimulationSurface PropertiesParticle SizeHumansPolyvinyl Alcohol

Stichwörter der Autor:innen

biological characterizationceramic powdercomponent ratiomechanical propertiesmolecular dynamics simulationshear-thinning capacity

Substanzen

Calcium Phosphatesbeta-tricalcium phosphateDurapatiteBiocompatible MaterialsPolyvinyl Alcohol

Autor:innen und Institutionen

  • College of Mechanical Engineering, Xinjiang University, Urumqi 830017, China.
  • Department of Mechanical Engineering, College of Design and Engineering, National University of Singapore, Singapore 117575, Singapore.
  • College of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China.
  • College of Aviation Academy, Changji University, Changji 831100, China.
  • Mechanical Engineering School, Northwestern Polytechnical University, Xi'an 710072, China.

ORCID-Profile: Yan Xu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yin, Z., Chen, Y., Yang, G., Wang, S., Wang, B., Wang, K., Zhang, S., Zhang, X., Wang, Y., & Xu, Y. (2025). 3D Printed HA/β-TCP Scaffold: A Macroscopic Microscopic Analysis and Biological Validation Study of the Effect of the Component Ratio on Performance. ACS Applied Bio Materials, 8(11), 9807-9823. https://doi.org/10.1021/acsabm.5c01082

Vancouver

Yin Z, Chen Y, Yang G, Wang S, Wang B, Wang K, et al. 3D Printed HA/β-TCP Scaffold: A Macroscopic Microscopic Analysis and Biological Validation Study of the Effect of the Component Ratio on Performance. ACS Applied Bio Materials. 2025;8(11):9807-9823. doi:10.1021/acsabm.5c01082

BibTeX
@article{Yin2025,
  author = {Yin, Zhitao and Chen, Yutong and Yang, Guang and Wang, Shuaishuai and Wang, Bingbing and Wang, Kefeng and Zhang, Shun and Zhang, Xujing and Wang, Yanen and Xu, Yan},
  title = {3D Printed HA/β-TCP Scaffold: A Macroscopic Microscopic Analysis and Biological Validation Study of the Effect of the Component Ratio on Performance},
  journal = {ACS Applied Bio Materials},
  year = {2025},
  volume = {8},
  number = {11},
  pages = {9807--9823},
  doi = {10.1021/acsabm.5c01082}
}
Kostenlos starten →