EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Materials Characterization of Stereolithography 3D Printed Polymer to Develop a Self-Driven Microfluidic Device for Bioanalytical Applications

Britanny L Stark, Michelle Gamboa, Aibhlin Esparza, Truman J Cavendar-Word, Diego Bermudez, Luisa Carlon, David A Roberson, Binata Joddar iD, Sylvia Natividad-Diaz iD

ACS Applied Bio Materials · 2024

DOI: 10.1021/acsabm.4c00059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Applied Bio Materials, 2024. Verfasst von Britanny L Stark und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Metallurgical, Materials, and Biomedical Engineering (MMBME), The University of Texas at El Paso (UTEP), 500 West University Avenue, El…. Hauptthemen laut MEDLINE: Biocompatible Materials, Polymers, Printing, Three-Dimensional. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: NIGMS NIH HHS, NIMHD NIH HHS, University of Texas System.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Kein Abstract verfügbar.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Biocompatible MaterialsPolymersPrinting, Three-DimensionalHumansCell SurvivalLab-On-A-Chip DevicesMaterials TestingMicrofluidic Analytical TechniquesParticle SizeStereolithography

Stichwörter der Autor:innen

3D printingcapillary flowmaterials characterizationmicrofluidicsstereolithography

Substanzen

Biocompatible MaterialsPolymers

Autor:innen und Institutionen

  • Department of Metallurgical, Materials, and Biomedical Engineering (MMBME), The University of Texas at El Paso (UTEP), 500 West University Avenue, El Paso, Texas 79968, United States.
  • 3D Printed Microphysiological Systems Laboratory, The University of Texas at El Paso, 500 West University Avenue, El Paso, Texas 79968, United States.
  • Polymer Extrusion Laboratory, The University of Texas at El Paso, 500 West University Avenue, El Paso, Texas 79968, United States.
  • Inspired Materials & Stem-Cell Based Tissue Engineering Laboratory (IMSTEL), The University of Texas at El Paso, 500 West University Avenue, El Paso, Texas 79968, United States.
  • Border Biomedical Research Center, University of Texas at El Paso, 500 West University Avenue, El Paso, Texas 79968, United States.

ORCID-Profile: Binata Joddar, Sylvia Natividad-Diaz

Förderung

  • NIGMS NIH HHS
  • NIMHD NIH HHS
  • University of Texas System
  • Cancer Prevention and Research Institute of Texas
  • National Institute of General Medical Sciences

Zitieren

APA

Stark, B. L., Gamboa, M., Esparza, A., Cavendar-Word, T. J., Bermudez, D., Carlon, L., Roberson, D. A., Joddar, B., & Natividad-Diaz, S. (2024). Materials Characterization of Stereolithography 3D Printed Polymer to Develop a Self-Driven Microfluidic Device for Bioanalytical Applications. ACS Applied Bio Materials. https://doi.org/10.1021/acsabm.4c00059

Vancouver

Stark BL, Gamboa M, Esparza A, Cavendar-Word TJ, Bermudez D, Carlon L, et al. Materials Characterization of Stereolithography 3D Printed Polymer to Develop a Self-Driven Microfluidic Device for Bioanalytical Applications. ACS Applied Bio Materials. 2024. doi:10.1021/acsabm.4c00059

BibTeX
@article{Stark2024,
  author = {Stark, Britanny L and Gamboa, Michelle and Esparza, Aibhlin and Cavendar-Word, Truman J and Bermudez, Diego and Carlon, Luisa and Roberson, David A and Joddar, Binata and Natividad-Diaz, Sylvia},
  title = {Materials Characterization of Stereolithography 3D Printed Polymer to Develop a Self-Driven Microfluidic Device for Bioanalytical Applications},
  journal = {ACS Applied Bio Materials},
  year = {2024},
  doi = {10.1021/acsabm.4c00059}
}
Kostenlos starten →