Inherent Antibacterial Properties of Biodegradable FeMnC(Cu) Alloys for Implant Application
ACS Applied Bio Materials · 19.02.2024 · 7 (2) · 839-852
DOI: 10.1021/acsabm.3c00835 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Applied Bio Materials, online erschienen am 22.01.2024. Verfasst von Birgit Paul und 11 weiteren Autor:innen. Beteiligte Einrichtung: Leibniz Institute for Solid State and Materials Research Dresden, Helmholtzstr. 20, 01069 Dresden, Germany. Hauptthemen laut MEDLINE: Alloys, Prostheses and Implants. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 67 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Implant-related infections or inflammation are one of the main reasons for implant failure. Therefore, different concepts for prevention are needed, which strongly promote the development and validation of improved material designs. Besides modifying the implant surface by, for example, antibacterial coatings (also implying drugs) for deterring or eliminating harmful bacteria, it is a highly promising strategy to prevent such implant infections by antibacterial substrate materials. In this work, the inherent antibacterial behavior of the as-cast biodegradable Fe69Mn30C1 (FeMnC) alloy against Gram-negative Pseudomonas aeruginosa and Escherichia coli as well as Gram-positive Staphylococcus aureus is presented for the first time in comparison to the clinically applied, corrosion-resistant AISI 316L stainless steel. In the second step, 3.5 wt % Cu was added to the FeMnC reference alloy, and the microbial corrosion as well as the proliferation of the investigated bacterial strains is further strongly influenced. This leads for instance to enhanced antibacterial activity of the Cu-modified FeMnC-based alloy against the very aggressive, wild-type bacteria P. aeruginosa. For clarification of the bacterial test results, additional analyses were applied regarding the microstructure and elemental distribution as well as the initial corrosion behavior of the alloys. This was electrochemically investigated by a potentiodynamic polarization test. The initial degraded surface after immersion were analyzed by glow discharge optical emission spectrometry and transmission electron microscopy combined with energy-dispersive X-ray analysis, revealing an increase of degradation due to Cu alloying. Due to their antibacterial behavior, both investigated FeMnC-based alloys in this study are attractive as a temporary implant material.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Leibniz Institute for Solid State and Materials Research Dresden, Helmholtzstr. 20, 01069 Dresden, Germany.
- Department of Cell Biology, Faculty of Biology, Universität Bielefeld, Universitätsstraße 25, 33615 Bielefeld, Germany.
- Institute of Materials Science, Technische Universität Bergakademie Freiberg, Gustav-Zeuner-Str. 5, 09599 Freiberg, Germany.
- Department of Thin Films and Physics of Nanostructures, Center of Spinelectronic Materials and Devices, Faculty of Physics, Universität Bielefeld, Universitätsstraße 25, 33615 Bielefeld, Germany.
ORCID-Profile: Birgit Paul, Annika Kiel, Martin Otto, Lars Giebeler, Annett Gebert, Julia Hufenbach
Zitieren
APA
Paul, B., Kiel, A., Otto, M., Gemming, T., Hoffmann, V., Giebeler, L., Kaltschmidt, B., Hütten, A., Gebert, A., Kaltschmidt, B., Kaltschmidt, C., & Hufenbach, J. (2024). Inherent Antibacterial Properties of Biodegradable FeMnC(Cu) Alloys for Implant Application. ACS Applied Bio Materials, 7(2), 839-852. https://doi.org/10.1021/acsabm.3c00835
Vancouver
Paul B, Kiel A, Otto M, Gemming T, Hoffmann V, Giebeler L, et al. Inherent Antibacterial Properties of Biodegradable FeMnC(Cu) Alloys for Implant Application. ACS Applied Bio Materials. 2024;7(2):839-852. doi:10.1021/acsabm.3c00835
BibTeX
@article{Paul2024,
author = {Paul, Birgit and Kiel, Annika and Otto, Martin and Gemming, Thomas and Hoffmann, Volker and Giebeler, Lars and Kaltschmidt, Bernhard and Hütten, Andreas and Gebert, Annett and Kaltschmidt, Barbara and Kaltschmidt, Christian and Hufenbach, Julia},
title = {Inherent Antibacterial Properties of Biodegradable FeMnC(Cu) Alloys for Implant Application},
journal = {ACS Applied Bio Materials},
year = {2024},
volume = {7},
number = {2},
pages = {839--852},
doi = {10.1021/acsabm.3c00835}
}
EUVIMED