Manageable Bubble Release Through 3D Printed Microcapillary for Highly Efficient Overall Water Splitting
Advanced Science · 2023-05 · 10 (13)
DOI: 10.1002/advs.202207495 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Science, online erschienen am 24.02.2023. Verfasst von Tianbiao Zeng und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Carbon Materials of Zhejiang Province, Wenzhou Key Lab of Advanced Energy Storage and Conversion, Zhejiang Province Key Lab of Leat…. Die Arbeit wurde bisher 48-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, Shenzhen Science and Technology Innovation Commission.
Abstract (Originalsprache)
Porous metal foams (e.g., Ni/Cu/Ti) are applied as catalyst supports extensively for water splitting due to their large specific area and excellent conductivity, however, intrinsic bubble congestion is unavoidable because of the irregular three‐dimensional (3D) networks, resulting in high polarization and degraded electrocatalytic performances. To boost the H 2 O decomposition kinetics, the immediate bubble removal and water supply sequential in the gas–liquid–solid interface is essential. Inspired by the high efficiency of water/nutrient transport in the capillaries plants, this work designs a graphene‐based capillary array with side holes as catalyst support to manage the bubble release and water supply via a Z ‐axis controllable digital light processing (DLP) 3D printing technology. Like planting rice, a low‐cost, high‐active CoNi carbonate hydroxide (CoNiCH) is planted on support. A homemade cell can reach 10 mA cm −2 in 1.51 V, and be kept at 30 mA cm −2 for 60 h without noticeable degradation, surpassing most of the known cells. This research provides a promising avenue to design and prepare advanced catalysts in various fields, including energy applications, pollutant treatment, and chemical synthesis.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Carbon Materials of Zhejiang Province, Wenzhou Key Lab of Advanced Energy Storage and Conversion, Zhejiang Province Key Lab of Leather Engineering, College of Chemistry and Materials Engineering, Wenzh…
- Shenzhen Key Laboratory for Additive Manufacturing of High-performance Materials, Department of Mechanical and Energy Engineering, Southern University of Science and Technology, Shenzhen, 518055, P. R. China.
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology Center, Harbin Institute of Technology, Shenzhen, 518055, P. R. China.
ORCID-Profile: Tianbiao Zeng, Jiaming Bai
Förderung
- National Key R&D Program of China
- National Natural Science Foundation of China
- Shenzhen Science and Technology Innovation Commission
- Shenzhen Municipality under Project of Start-up Grant for Shenzhen Oversea High-Level Talents
Zitieren
APA
Zeng, T., Guo, B., Xu, Z., Mo, F., Chen, X., Wang, L., Ding, Y., & Bai, J. (2023). Manageable Bubble Release Through 3D Printed Microcapillary for Highly Efficient Overall Water Splitting. Advanced Science, 10(13). https://doi.org/10.1002/advs.202207495
Vancouver
Zeng T, Guo B, Xu Z, Mo F, Chen X, Wang L, et al. Manageable Bubble Release Through 3D Printed Microcapillary for Highly Efficient Overall Water Splitting. Advanced Science. 2023;10(13). doi:10.1002/advs.202207495
BibTeX
@article{Zeng2023,
author = {Zeng, Tianbiao and Guo, Binbin and Xu, Zhiyao and Mo, Funian and Chen, Xiaoteng and Wang, Liping and Ding, Yihong and Bai, Jiaming},
title = {Manageable Bubble Release Through 3D Printed Microcapillary for Highly Efficient Overall Water Splitting},
journal = {Advanced Science},
year = {2023},
volume = {10},
number = {13},
doi = {10.1002/advs.202207495}
}
EUVIMED