EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Liquid-Crystalline Polymer Alloy Design through Interfacial Reactions Enabled by In Situ Polymerization and Reactive Blending

Gosuke Washino, Kyoya Tachibana, Keiichi Kuboyama, Juri Asada, Tsuyoshi Takano, Ryoyu Hifumi, Ikuyoshi Tomita, Toshiaki Ougizawa

Macromolecules · 10.11.2026 · 59 (21) · 11938-11946

DOI: 10.1021/acs.macromol.6c01698 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Macromolecules, online erschienen am 14.10.2026. Verfasst von Gosuke Washino und 7 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Liquid-crystalline polymers (LCPs), an important class of super engineering thermoplastics, exhibit outstanding melt processability and are attractive materials for designing high-performance polymer alloys. However, the fundamental insights required to overcome macroscopic phase separation arising from the intrinsic structural disparity between liquid-crystalline and isotropic polymers, and the design guidelines built on these insights, have not yet been clearly established. Here, we investigated an alloy design strategy for LCP-based systems through an interfacial-reaction approach, using poly(phenylene ether) (PPE) as a dispersed phase capable of copolymer formation with the LCP matrix. First, in melt-mixed LCP/PPE blends prepared by twin-screw extrusion, the PPE domain size was minimized when the viscosity ratio between the liquid-crystalline matrix and the isotropic dispersed phase approached unity. We then constructed LCP/PPE alloys through two reactive routes: in situ polymerization of the LCP in the presence of PPE and reactive melt blending of LCP and PPE. The results collectively indicate that copolymer formation at the liquid-crystalline/isotropic interface reduces melt-state interfacial tension while reinforcing the interface in the solid state, thereby enabling fine dispersion and enhanced mechanical performance. These findings highlight the central role of interfacial engineering beyond differences in higher-order structure and provide a general route to tough, highly processable LCP-based alloys.

Zitieren

APA

Washino, G., Tachibana, K., Kuboyama, K., Asada, J., Takano, T., Hifumi, R., Tomita, I., & Ougizawa, T. (2026). Liquid-Crystalline Polymer Alloy Design through Interfacial Reactions Enabled by In Situ Polymerization and Reactive Blending. Macromolecules, 59(21), 11938-11946. https://doi.org/10.1021/acs.macromol.6c01698

Vancouver

Washino G, Tachibana K, Kuboyama K, Asada J, Takano T, Hifumi R, et al. Liquid-Crystalline Polymer Alloy Design through Interfacial Reactions Enabled by In Situ Polymerization and Reactive Blending. Macromolecules. 2026;59(21):11938-11946. doi:10.1021/acs.macromol.6c01698

BibTeX
@article{Washino2026,
  author = {Washino, Gosuke and Tachibana, Kyoya and Kuboyama, Keiichi and Asada, Juri and Takano, Tsuyoshi and Hifumi, Ryoyu and Tomita, Ikuyoshi and Ougizawa, Toshiaki},
  title = {Liquid-Crystalline Polymer Alloy Design through Interfacial Reactions Enabled by In Situ Polymerization and Reactive Blending},
  journal = {Macromolecules},
  year = {2026},
  volume = {59},
  number = {21},
  pages = {11938--11946},
  doi = {10.1021/acs.macromol.6c01698}
}
Kostenlos starten →