In Situ Alloying Enabled by Active Liquid Metal Filler for Self‐Healing Composite Polymer Electrolytes
Angewandte Chemie International Edition · 18.11.2024 · 63 (47)
DOI: 10.1002/anie.202410463 ↗Kurz gefasst
Fachartikel in der Zeitschrift Angewandte Chemie International Edition, online erschienen am 15.10.2024. Verfasst von Kai Wu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Materials Science and Engineering Program and Walker Department of Mechanical Engineering, The University of Texas at Austin, 78712, Austin, TX, USA. Die Arbeit wurde bisher 32-mal zitiert (Crossref) und nennt 82 Literaturangaben. Gefördert von: U.S. Department of Energy.
Abstract (Originalsprache)
Solid inorganics, known for kinetically inhibiting polymer crystallization and enhancing ionic conductivity, have attracted significant attention in solid polymer electrolytes. However, current composite polymer electrolytes (CPEs) are still facing challenges in Li metal batteries, falling short of inhibiting severe dendritic growth and resulting in very limited cycling life. This study introduces Ga 62.5 In 21.5 Sn 16 (Galinstan) liquid metal (LM) as an active liquid alternative to conventional passive solid fillers, aiming at realizing self‐healing protection against dendrite problems. Compared to solid inorganics, for example silica, LM droplets could more significantly reduce polymer crystallinity and enhance Li‐ion conductivity due to their liquid nature, especially at temperatures below the polymer melting point. More importantly, LMs are unraveled as dynamic chemical traps, which are capable of blocking and consuming lithium dendrites upon contact via in situ alloying during battery operation and further inhibiting dendritic growth due to the lower deposition energy barrier of the formed Li‐LM alloy. As a proof of concept, by strategically designing an asymmetric CPE with the active LM filling, a solid‐state Li/LiFePO 4 battery achieves promising full‐cell functionality with notable rate performance and stable cycle life. This active filler‐mediated self‐healing approach could bring new insights into the battery design in versatile solid‐state systems.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Materials Science and Engineering Program and Walker Department of Mechanical Engineering, The University of Texas at Austin, 78712, Austin, TX, USA.
- Institute of Energy, Sustainability, Environment, and Equity, Stony Brook University, 11794, Stony Brook, NY, USA.
- Department of Chemistry, Stony Brook University, 11794, Stony Brook, NY, USA.
- Interdisciplinary Science Department, Brookhaven National Laboratory, 11973, Upton, NY, USA.
- Department of Materials Science and Chemical Engineering, Stony Brook University, 11794, Stony Brook, NY, USA.
ORCID-Profile: Guihua Yu
Förderung
- U.S. Department of Energy
Zitieren
APA
Wu, K., Ju, Z., Zhang, B., Marschilok, A. C., Takeuchi, E. S., Takeuchi, K. J., & Yu, G. (2024). In Situ Alloying Enabled by Active Liquid Metal Filler for Self‐Healing Composite Polymer Electrolytes. Angewandte Chemie International Edition, 63(47). https://doi.org/10.1002/anie.202410463
Vancouver
Wu K, Ju Z, Zhang B, Marschilok AC, Takeuchi ES, Takeuchi KJ, et al. In Situ Alloying Enabled by Active Liquid Metal Filler for Self‐Healing Composite Polymer Electrolytes. Angewandte Chemie International Edition. 2024;63(47). doi:10.1002/anie.202410463
BibTeX
@article{Wu2024,
author = {Wu, Kai and Ju, Zhengyu and Zhang, Bowen and Marschilok, Amy C and Takeuchi, Esther S and Takeuchi, Kenneth J and Yu, Guihua},
title = {In Situ Alloying Enabled by Active Liquid Metal Filler for Self‐Healing Composite Polymer Electrolytes},
journal = {Angewandte Chemie International Edition},
year = {2024},
volume = {63},
number = {47},
doi = {10.1002/anie.202410463}
}
EUVIMED