High-Strength, Lightweight TPMS Structures from Surface-Modified Coal-Based Solid Waste Glass Powder by DLP Light-Curing 3D Printing
Langmuir · 02.12.2025 · 41 (47) · 32216-32226
DOI: 10.1021/acs.langmuir.5c05086 ↗Kurz gefasst
Fachartikel in der Zeitschrift Langmuir, online erschienen am 19.11.2025. Verfasst von Runze Liu und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, University of Science & Technology Beijing, Beijing 100083, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 68 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
To reduce the accumulation of coal-based solid waste and lower the cost of three-dimensional (3D) printing raw materials. This study demonstrates the high-value utilization of coal-based solid waste through the fabrication of lightweight, high-performance triply periodic minimal surface (TPMS) structures using digital light processing (DLP) 3D printing. Coal-based solid waste glass powder (CWGP) was modified with silane coupling agents (KH550, KH560, and KH570) to enhance its compatibility with the 1,6-hexanediol diacrylate (HDDA) resin system. The modification mechanism was systematically investigated, revealing that the powder modified by KH570 has optimal hydrophobic surface properties (water contact angle: 97.1°). The dispersion performance of the powder was significantly improved, reducing slurry viscosity to 0.032 Pa·s at a shear rate of 30 s-1. The resulting slurry exhibited excellent stability and printability, enabling the successful manufacturing of five complex TPMS architectures: Gyroid, Schwarz, Diamond, Lidinoid, and Split-P. Mechanical testing showed that the Split-P structure possessed the highest compressive strength, reaching 12.81 MPa. This work not only offers a sustainable strategy for repurposing industrial solid waste into functional structures but also highlights the potential of such TMPS structures for advanced applications in aerospace, rail transit, and other engineering fields.
Autor:innen und Institutionen
- Department of Materials Science and Engineering, University of Science & Technology Beijing, Beijing 100083, China.
ORCID-Profile: Runze Liu
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Liu, R., & Wang, S. (2025). High-Strength, Lightweight TPMS Structures from Surface-Modified Coal-Based Solid Waste Glass Powder by DLP Light-Curing 3D Printing. Langmuir, 41(47), 32216-32226. https://doi.org/10.1021/acs.langmuir.5c05086
Vancouver
Liu R, Wang S. High-Strength, Lightweight TPMS Structures from Surface-Modified Coal-Based Solid Waste Glass Powder by DLP Light-Curing 3D Printing. Langmuir. 2025;41(47):32216-32226. doi:10.1021/acs.langmuir.5c05086
BibTeX
@article{Liu2025,
author = {Liu, Runze and Wang, Shuming},
title = {High-Strength, Lightweight TPMS Structures from Surface-Modified Coal-Based Solid Waste Glass Powder by DLP Light-Curing 3D Printing},
journal = {Langmuir},
year = {2025},
volume = {41},
number = {47},
pages = {32216--32226},
doi = {10.1021/acs.langmuir.5c05086}
}
EUVIMED