EUVIMEDEUVIMED entdecken
Crossref

Characterizing Aqueous Foams by In Situ Viscosity Measurement in a Foam Column

Wei Yu iD, Jack Hau Yung Lo iD, Mazen Yousef Kanj iD

Langmuir · 17.10.2023 · 39 (41) · 14711-14717

DOI: 10.1021/acs.langmuir.3c02093 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Langmuir, online erschienen am 04.10.2023. Verfasst von Wei Yu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Center for Integrative Petroleum Research (CIPR), College of Petroleum Engineering & Geosciences, King Fahd University of Petroleum & Minerals, Dhahr…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: King Fahd University of Petroleum and Minerals, University Grants Committee, Chinese University of Hong Kong.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Foam characterization is essential in many applications of foams, such as cleaning, food processing, cosmetics, and oil production, due to these applications' diversified requirements. The standard characterization method, the foam column test, cannot provide sufficient information for in-depth studies. Hence, there have been many studies that incorporated different characterization methods into a standard test. It should be enlightening and feasible to measure the foam viscosity, which is both of practical and fundamental interest during the foam column test, but it has never been done before. Here, we demonstrate a method to characterize aqueous foams and their aging behaviors with the simultaneous measurement of foam viscosity and foam height. Using a vibration viscometer, we integrate foam column experiments with in situ foam viscosity measurements. We studied the correlation among the foam structure, foam height, and foam viscosity during the foam decay process. We found a drastic decrease in foam viscosity in the early foam decay, while the foam height remained unchanged, which is explained by coarsening. This method is much more sensitive and time-efficient than conventional foam-height-based methods by comparing the half-life. This method successfully characterizes the stability of foams made of various combinations of surfactants and gases.

Autor:innen und Institutionen

  • Center for Integrative Petroleum Research (CIPR), College of Petroleum Engineering & Geosciences, King Fahd University of Petroleum & Minerals, Dhahran 31261, Saudi Arabia.

ORCID-Profile: Wei Yu, Jack Hau Yung Lo, Mazen Yousef Kanj

Förderung

  • King Fahd University of Petroleum and Minerals
  • University Grants Committee
  • Chinese University of Hong Kong
  • Dhahran Techno Valley Holding Company

Zitieren

APA

Yu, W., Lo, J. H. Y., & Kanj, M. Y. (2023). Characterizing Aqueous Foams by In Situ Viscosity Measurement in a Foam Column. Langmuir, 39(41), 14711-14717. https://doi.org/10.1021/acs.langmuir.3c02093

Vancouver

Yu W, Lo JHY, Kanj MY. Characterizing Aqueous Foams by In Situ Viscosity Measurement in a Foam Column. Langmuir. 2023;39(41):14711-14717. doi:10.1021/acs.langmuir.3c02093

BibTeX
@article{Yu2023,
  author = {Yu, Wei and Lo, Jack Hau Yung and Kanj, Mazen Yousef},
  title = {Characterizing Aqueous Foams by In Situ Viscosity Measurement in a Foam Column},
  journal = {Langmuir},
  year = {2023},
  volume = {39},
  number = {41},
  pages = {14711--14717},
  doi = {10.1021/acs.langmuir.3c02093}
}
Kostenlos starten →