EUVIMEDEUVIMED entdecken
Crossref

Potential-Driven Current Limitation and Performance Trade-Off in Lithium-Ion Batteries with a Protective Conducting-Polymer Layer

Denis V. Zhuravlev, Sergei A. Vasilkov, Ilia A. Elagin, Vladimir A. Chirkov, Oleg V. Levin

The Journal of Physical Chemistry C · 17.11.2026

DOI: 10.1021/acs.jpcc.6c05612 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Physical Chemistry C, online erschienen am 17.11.2026. Verfasst von Denis V. Zhuravlev und 4 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Gefördert von: Russian Science Foundation, Saint Petersburg State University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Potential-responsive conducting-polymer layers can limit fault currents in lithium-ion batteries. However, previous cell-scale models treated polymer switching as instantaneous and did not resolve the electrochemical and ion-transport dynamics. Using a poly[Ni(CH3OSalen)] interlayer between the positive electrode and current collector as a representative case, we analyze potential-driven current limitation using a reduced one-dimensional model and a porous-electrode model of a LiCoO2/graphite cell. For this representative material system, the interlayer is described using either an experimentally based quasi-equilibrium conductivity relation or a dynamic formulation accounting for finite-rate anion exchange and diffusion within polymer domains. The reduced model reveals an intrinsic trade-off between current limitation and nominal-performance losses. For the representative 3 μm poly[Ni(CH3OSalen)] layer considered here, the delivered-energy loss is approximately 3% at 0.2C and 7–8% at 1C. During an ideal zero-resistance external short circuit, the current at 10–2 s decreases from approximately 330C without protection to 3.4C and 14.8C in the quasi-equilibrium and dynamic models, respectively. The dynamic formulation qualitatively indicates that finite polymer response can increase the initial current and early heat release, although protected-cell currents converge at longer times. Potential-driven switching alone increases the time for the adiabatic temperature estimate to reach 100 °C from 7.1 s to 47–60 s. Comparison with experimental discharge profiles reproduces the magnitude of the layer-induced voltage penalty but not its evolution, identifying the measured conductivity–potential relation as the main quantitative uncertainty. These results establish a general framework for analyzing the trade-off between current limitation and nominal battery performance in potential-responsive resistive interlayers.

Förderung

  • Russian Science Foundation
  • Saint Petersburg State University

Zitieren

APA

Zhuravlev, D. V., Vasilkov, S. A., Elagin, I. A., Chirkov, V. A., & Levin, O. V. (2026). Potential-Driven Current Limitation and Performance Trade-Off in Lithium-Ion Batteries with a Protective Conducting-Polymer Layer. The Journal of Physical Chemistry C. https://doi.org/10.1021/acs.jpcc.6c05612

Vancouver

Zhuravlev DV, Vasilkov SA, Elagin IA, Chirkov VA, Levin OV. Potential-Driven Current Limitation and Performance Trade-Off in Lithium-Ion Batteries with a Protective Conducting-Polymer Layer. The Journal of Physical Chemistry C. 2026. doi:10.1021/acs.jpcc.6c05612

BibTeX
@article{Zhuravlev2026,
  author = {Zhuravlev, Denis V. and Vasilkov, Sergei A. and Elagin, Ilia A. and Chirkov, Vladimir A. and Levin, Oleg V.},
  title = {Potential-Driven Current Limitation and Performance Trade-Off in Lithium-Ion Batteries with a Protective Conducting-Polymer Layer},
  journal = {The Journal of Physical Chemistry C},
  year = {2026},
  doi = {10.1021/acs.jpcc.6c05612}
}
Kostenlos starten →