Breaking the Porosity‐Strength Trade‐Off in Hierarchical Current Collectors for Lithium Metal Batteries
Small · 13.11.2026
DOI: 10.1002/smll.76716 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small, online erschienen am 13.11.2026. Verfasst von Yu Zhang und 11 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Flexible Electronics (LoFE) & Institute of Advanced Materials (IAM), Nanjing University of Posts & Telecommunications, Nanjin…. Die Arbeit nennt 67 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province of China, Basic Research Program of Jiangsu.
Abstract (Originalsprache)
Porous metallic current collectors can homogenize lithium (Li) deposition and accommodate volume change, but increasing porosity generally compromises mechanical integrity under stack pressure. Here, a mechanically reinforced, gradient‐designed hierarchical current collector (GDH CC) is constructed from an FeNi alloy skeleton, a conformal Cu shell, and Al 2 O 3 ‐modified outer faces. The FeNi‐containing framework reinforces the porous architecture while the spatially differentiated interfaces are designed to favor internal Li accommodation. The 50 µm‐thick CC combines a retained porosity of 80.13% with a compressive yield strength of 0.309 MPa and was examined after passing a nominal Li deposition charge of 8 mAh cm −2 . Cross‐sectional microscopy and in situ optical observations indicate center‐outward plating and reverse stripping within the scaffold. The GDH CC delivers an average Coulombic efficiency of 98.7% for 400 cycles at 1 mA cm −2 and 1 mAh cm −2 and supports stable bidirectional cycling in pouch‐type cells. A multilayer LFP | Li/GDH CC | LFP pouch cell delivers 145 mAh g −1 at 1 C, corresponding to cell‐level gravimetric and volumetric energy densities of 172.49 Wh kg −1 and 297.78 Wh L −1 , respectively. These results identify mechanical reinforcement as an important design dimension for high‐porosity Li hosts.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Flexible Electronics (LoFE) & Institute of Advanced Materials (IAM), Nanjing University of Posts & Telecommunications, Nanjing, China.
- Jiangsu Key Laboratory of Quantum Computing Science and Devices, School of Science, Nanjing University of Posts & Telecommunications, Nanjing, China.
- Materials Science and Engineering, King Abdullah University of Science and Technology (KAUST), Thuwal, Saudi Arabia.
- Suzhou Vocational Institute of Industrial Technology, Suzhou International Education Park, Suzhou, China.
ORCID-Profile: Fanlai Zhang, Li Shi, Yizhou Wang, Jianyu Chen, Yanwen Ma, Jin Zhao
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province of China
- Basic Research Program of Jiangsu
- Science and Technology Program of Suzhou
- Nanjing University of Posts and Telecommunications Start-up Fund
Zitieren
APA
Zhang, Y., Zhang, F., Zhao, H., Guo, Z., Chen, X., Ge, Z., Shi, L., Shen, Z., Wang, Y., Chen, J., Ma, Y., & Zhao, J. (2026). Breaking the Porosity‐Strength Trade‐Off in Hierarchical Current Collectors for Lithium Metal Batteries. Small. https://doi.org/10.1002/smll.76716
Vancouver
Zhang Y, Zhang F, Zhao H, Guo Z, Chen X, Ge Z, et al. Breaking the Porosity‐Strength Trade‐Off in Hierarchical Current Collectors for Lithium Metal Batteries. Small. 2026. doi:10.1002/smll.76716
BibTeX
@article{Zhang2026,
author = {Zhang, Yu and Zhang, Fanlai and Zhao, Haoran and Guo, Zhaoci and Chen, Xudong and Ge, Zhao and Shi, Li and Shen, Zhen and Wang, Yizhou and Chen, Jianyu and Ma, Yanwen and Zhao, Jin},
title = {Breaking the Porosity‐Strength Trade‐Off in Hierarchical Current Collectors for Lithium Metal Batteries},
journal = {Small},
year = {2026},
doi = {10.1002/smll.76716}
}
EUVIMED