EUVIMEDOpdag EUVIMED
Open access · CC BY-NC-ND 4.0

Mineral Scaling in 3D Interfacial Solar Evaporators—A Challenge for Brine Treatment and Lithium Recovery

Aydin F Eskafi, Casey De Finnda iD, Christopher A Garcia, Baoxia Mi iD

Environmental Science & Technology · 2025-01-14 · 59 (1) · 892-901

DOI: 10.1021/acs.est.4c08151 ↗

At a glance

Journal article in Environmental Science & Technology, published online on 2025-01-02. Written by Aydin F Eskafi and 3 co-authors. Institution: Department of Civil and Environmental Engineering, University of California, Berkeley, Berkeley, California 94720, United States. Major MEDLINE topics: Lithium. Cited 52 times so far (Crossref); 47 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: National Science Foundation, U.S. Department of Energy.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

In this work, we analyzed the effects of mineral scaling on the performance of a 3D interfacial solar evaporator, with a focus on the cations relevant to lithium recovery from brackish water. The field has been rapidly moving toward resource recovery applications from brines with higher cation concentrations. However, the potential complications caused by common minerals in these brines other than NaCl have been largely overlooked. Therefore, in this study, we thoroughly examined the effects of two common cations (calcium and magnesium) on the long-term solar evaporation performance of a 3D graphene oxide stalk. The 3D stalk can achieve an evaporation flux as high as 17.8 kg m–2 h–1 under one-sun illumination, and accumulation of NaCl on the stalk surface has no impact. However, the presence of CaCl2 and MgCl2 significantly reduces the evaporative flux even in solutions lacking scale-forming anions. A close examination of scale formation during long-term evaporation experiments revealed that CaCl2 and MgCl2 tend to precipitate out within the stalk, thus blocking water transport through the stalk and significantly dropping the evaporation rates. These findings imply that research attention is needed to modify and optimize the internal water transport channels for 3D evaporators. Additionally, we emphasize the importance of testing realistic mixtures—including prominent divalent cations— and testing long-term operations in interfacial solar evaporation research and investigating approaches to mitigate the negative impacts of divalent cations.

Subjects

MeSH terms (MEDLINE)

LithiumMineralsSaltsGraphiteSunlight

Author keywords

3D evaporatorInterfacial solar evaporationdivalent cation scalinggraphene oxidelithium recoverysolar desalinationsolar resource recovery

Substances

LithiumbrineMineralsSaltsGraphite

Authors and institutions

  • Department of Civil and Environmental Engineering, University of California, Berkeley, Berkeley, California 94720, United States.
  • Department of Civil & Environmental Engineering, UC Davis, Davis, California 95616, United States.
  • Department of Chemical and Biomolecular Engineering, University of California, Berkeley, Berkeley, California 94720, United States.

ORCID profiles: Casey De Finnda, Baoxia Mi

Funding

  • National Science Foundation
  • U.S. Department of Energy

Cite

APA

Eskafi, A. F., De Finnda, C., Garcia, C. A., & Mi, B. (2025). Mineral Scaling in 3D Interfacial Solar Evaporators—A Challenge for Brine Treatment and Lithium Recovery. Environmental Science & Technology, 59(1), 892-901. https://doi.org/10.1021/acs.est.4c08151

Vancouver

Eskafi AF, De Finnda C, Garcia CA, Mi B. Mineral Scaling in 3D Interfacial Solar Evaporators—A Challenge for Brine Treatment and Lithium Recovery. Environmental Science & Technology. 2025;59(1):892-901. doi:10.1021/acs.est.4c08151

BibTeX
@article{Eskafi2025,
  author = {Eskafi, Aydin F and De Finnda, Casey and Garcia, Christopher A and Mi, Baoxia},
  title = {Mineral Scaling in 3D Interfacial Solar Evaporators—A Challenge for Brine Treatment and Lithium Recovery},
  journal = {Environmental Science & Technology},
  year = {2025},
  volume = {59},
  number = {1},
  pages = {892--901},
  doi = {10.1021/acs.est.4c08151}
}
Start for free →