Characterizing Volatile Emissions and Combustion Byproducts from Aqueous Film-Forming Foams Using Online Chemical Ionization Mass Spectrometry
Environmental Science & Technology · 2024
DOI: 10.1021/acs.est.3c09255 ↗At a glance
Journal article in Environmental Science & Technology, 2024. Written by James M Mattila and 7 co-authors. Institution: Oak Ridge Institute for Science and Education, Office of Research and Development, U.S. Environmental Protection Agency, Durham, North Carolina 27709…. Major MEDLINE topics: Water Pollutants, Chemical, Fluorocarbons. Cited 39 times so far (Crossref); 79 references. The full text is freely available in PubMed Central. Funded by: Intramural EPA.
Abstract (original language)
Aqueous film-forming foams (AFFFs) are used in firefighting applications and often contain per- and polyfluoroalkyl substances (PFAS), which can detrimentally impact environmental and biological health. Incineration is a potential disposal method for AFFFs, which may produce secondary PFAS and other air pollutants. We used online chemical ionization mass spectrometry (CIMS) to measure volatile PFAS emissions from incinerating AFFF concentrate solutions. We quantified perfluorinated carboxylic acids (PFCAs) during the incineration of legacy and contemporary AFFFs. These included trifluoroacetic acid, which reached mg m-3 quantities in the incinerator exhaust. These PFCAs likely arose as products of incomplete combustion of AFFF fluorosurfactants with lower peak furnace temperatures yielding higher PFCA concentrations. We also detected other short-chain PFAS, and other novel chemical products in AFFF combustion emissions. The volatile headspace above AFFF solutions contained larger (C ≥ 8), less oxidized PFAS detected by CIMS. We identified neutral PFAS resembling fluorotelomer surfactants (e.g., fluorotelomer sulfonamide alkylbetaines and fluorotelomer thioether amido sulfonates) and fluorotelomer alcohols in contemporary AFFF headspaces. Directly comparing the distinct chemical spaces of AFFF volatile headspace and combustion byproducts as measured by CIMS provides insight toward the chemistry of PFAS during thermal treatment of AFFFs.
Subjects
MeSH terms (MEDLINE)
Author keywords
Substances
Authors and institutions
- Oak Ridge Institute for Science and Education, Office of Research and Development, U.S. Environmental Protection Agency, Durham, North Carolina 27709, United States.
- Center for Environmental Measurement and Modeling, Office of Research and Development, U.S. Environmental Protection Agency, Durham, North Carolina 27709, United States.
- Jacobs Technology Inc., Cary, North Carolina 27518, United States.
ORCID profiles: James M Mattila, Jonathan D Krug, John H Offenberg
Funding
- Intramural EPA
Cite
APA
Mattila, J. M., Krug, J. D., Roberson, W. R., Burnette, R. P., McDonald, S., Virtaranta, L., Offenberg, J. H., & Linak, W. P. (2024). Characterizing Volatile Emissions and Combustion Byproducts from Aqueous Film-Forming Foams Using Online Chemical Ionization Mass Spectrometry. Environmental Science & Technology. https://doi.org/10.1021/acs.est.3c09255
Vancouver
Mattila JM, Krug JD, Roberson WR, Burnette RP, McDonald S, Virtaranta L, et al. Characterizing Volatile Emissions and Combustion Byproducts from Aqueous Film-Forming Foams Using Online Chemical Ionization Mass Spectrometry. Environmental Science & Technology. 2024. doi:10.1021/acs.est.3c09255
BibTeX
@article{Mattila2024,
author = {Mattila, James M and Krug, Jonathan D and Roberson, William R and Burnette, R Preston and McDonald, Stella and Virtaranta, Larry and Offenberg, John H and Linak, William P},
title = {Characterizing Volatile Emissions and Combustion Byproducts from Aqueous Film-Forming Foams Using Online Chemical Ionization Mass Spectrometry},
journal = {Environmental Science & Technology},
year = {2024},
doi = {10.1021/acs.est.3c09255}
}
EUVIMED