EUVIMEDOpdag EUVIMED
Crossref

Sulfur Dioxide Promoted Mercury Fast Deposition over a Selenite-Chloride-Induced Surface from Wet Flue Gas

Qinyuan Hong iD, Xiangling Cai, Jiaxing Li, Wenjun Huang iD, Zan Qu iD, Naiqiang Yan iD, Haomiao Xu iD

Environmental Science & Technology · 2023-07-25 · 57 (29) · 10882-10890

DOI: 10.1021/acs.est.3c03411 ↗

At a glance

Journal article in Environmental Science & Technology, published online on 2023-07-12. Written by Qinyuan Hong and 6 co-authors. Institution: School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China. Major MEDLINE topics: Mercury, Environmental Pollutants, Air Pollutants. Cited 11 times so far (Crossref); 46 references. Funded by: National Key Research and Development Program of China, Shanghai Tongji Gao Tingyao Environmental Science and Technology Development Foundation, National Natural Science Foundation of China.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Gaseous elemental mercury (Hg0) extraction from industrial flue gases is undergoing intense research due to its unique properties. Selective adsorption that renders Hg0 to HgO or HgS over metal oxide- or sulfide-based sorbents is a promising method, yet the sorbents are easily poisoned by sulfur dioxide (SO2) and H2O vapor. The Se-Cl intermediate derived from SeO2 and HCl driven by SO2 has been demonstrated to stabilize Hg0. Thus, a surface-induced method was put forward when using γ-Al2O3 supported selenite-chloride (xSeO32--yCl-, named xSe-yCl) for mercury deposition. Results confirmed that under 3000 ppm SO2 and 4% H2O, Se-2Cl exhibited the highest induced adsorption performance at 160 °C and higher humidity can accelerate the induction process. Driven by SO2 under the wet interface, the in situ generated active Se0 has high affinity toward Hg0, and the introduction of Cl- enabled the fast-trapping and stabilization of Hg0 due to its intercalation in the HgSe product. Additionally, the long-time scale-up experiment showed a gradient color change of the Se-2Cl-induced surface, which maintained almost 100% Hg0 removal efficiency over 180 h with a normalized adsorption capacity of 157.26 mg/g. This surface-induced method has the potential for practical application and offers a guideline for reversing the negative effect of SO2 on gaseous pollutant removal.

Subjects

MeSH terms (MEDLINE)

MercuryEnvironmental PollutantsAir PollutantsSulfur DioxideChloridesOxidesAdsorption

Author keywords

fast-trapping of Hg0high concentrations of SO2 and H2Oinduced adsorptionselenite-chloride surfacestability

Substances

Sulfur DioxideMercuryChloridesEnvironmental PollutantsOxidesAir Pollutants

Authors and institutions

  • School of Environmental Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
  • Shanghai Institute of Pollution Control and Ecological Security, Shanghai 200092, China.

ORCID profiles: Qinyuan Hong, Wenjun Huang, Zan Qu, Naiqiang Yan, Haomiao Xu

Funding

  • National Key Research and Development Program of China
  • Shanghai Tongji Gao Tingyao Environmental Science and Technology Development Foundation
  • National Natural Science Foundation of China

Cite

APA

Hong, Q., Cai, X., Li, J., Huang, W., Qu, Z., Yan, N., & Xu, H. (2023). Sulfur Dioxide Promoted Mercury Fast Deposition over a Selenite-Chloride-Induced Surface from Wet Flue Gas. Environmental Science & Technology, 57(29), 10882-10890. https://doi.org/10.1021/acs.est.3c03411

Vancouver

Hong Q, Cai X, Li J, Huang W, Qu Z, Yan N, et al. Sulfur Dioxide Promoted Mercury Fast Deposition over a Selenite-Chloride-Induced Surface from Wet Flue Gas. Environmental Science & Technology. 2023;57(29):10882-10890. doi:10.1021/acs.est.3c03411

BibTeX
@article{Hong2023,
  author = {Hong, Qinyuan and Cai, Xiangling and Li, Jiaxing and Huang, Wenjun and Qu, Zan and Yan, Naiqiang and Xu, Haomiao},
  title = {Sulfur Dioxide Promoted Mercury Fast Deposition over a Selenite-Chloride-Induced Surface from Wet Flue Gas},
  journal = {Environmental Science & Technology},
  year = {2023},
  volume = {57},
  number = {29},
  pages = {10882--10890},
  doi = {10.1021/acs.est.3c03411}
}
Start for free →