Breakdown and Modification of Microplastic Beads by Aeolian Abrasion
Environmental Science & Technology · 2023-01-10 · 57 (1) · 76-84
DOI: 10.1021/acs.est.2c05396 ↗At a glance
Journal article in Environmental Science & Technology, published online on 2022-12-15. Written by Joanna E Bullard and 3 co-authors. Institution: Geography and Environment, Loughborough University, Leicestershire LE11 3TU, U.K. Major MEDLINE topics: Microplastics, Plastics. Cited 62 times so far (Crossref); 56 references. The full text is freely available (open access, CC BY 4.0). Funded by: Natural Environment Research Council.
Abstract (original language)
Saltation is an important wind erosion process that can cause the modification and breakdown of particles by aeolian abrasion. It is recognized that microplastic particles can be transported by wind, but the effect of saltation on microplastic properties is unknown. This study examined the impact of simulated saltation alongside quartz grains on the size, shape, and surface properties of spherical microplastic beads. The diameter of the microplastics was reduced by 30-50% over 240-300 h of abrasion with a mass loss of c. 80%. For abrasion periods up to 200 h, the microplastic beads remained spherical with minimal change to overall shape. Over 95% of the fragments of plastic removed from the surface of the microbeads during the abrasion process had a diameter of ≤10 μm. In addition, during the abrasion process, fine particles derived from breakdown of the quartz grains became attached to the surfaces of the microbeads resulting in a reduction in carbon and an increase in silicon detected on the particle surface. The results suggest that microplastics may be mechanically broken down during aeolian saltation and small fragments produced have the potential for long distance transport as well as being within the size range for human respiration.
Subjects
MeSH terms (MEDLINE)
Author keywords
Substances
Authors and institutions
- Geography and Environment, Loughborough University, Leicestershire LE11 3TU, U.K.
- Loughborough Materials Characterisation Centre, Department of Materials, Loughborough University, Leicestershire LE11 3TU, U.K.
ORCID profiles: Joanna E Bullard, Sam Davis
Funding
- Natural Environment Research Council
Cite
APA
Bullard, J. E., Zhou, Z., Davis, S., & Fowler, S. (2023). Breakdown and Modification of Microplastic Beads by Aeolian Abrasion. Environmental Science & Technology, 57(1), 76-84. https://doi.org/10.1021/acs.est.2c05396
Vancouver
Bullard JE, Zhou Z, Davis S, Fowler S. Breakdown and Modification of Microplastic Beads by Aeolian Abrasion. Environmental Science & Technology. 2023;57(1):76-84. doi:10.1021/acs.est.2c05396
BibTeX
@article{Bullard2023,
author = {Bullard, Joanna E and Zhou, Zhaoxia and Davis, Sam and Fowler, Shaun},
title = {Breakdown and Modification of Microplastic Beads by Aeolian Abrasion},
journal = {Environmental Science & Technology},
year = {2023},
volume = {57},
number = {1},
pages = {76--84},
doi = {10.1021/acs.est.2c05396}
}
EUVIMED