From Geometric Similarity to Behavioral Equivalence: 3D-Printed Synthetic Cores and Microfluidic Core Chips
Energy & Fuels · 13.11.2026
DOI: 10.1021/acs.energyfuels.6c04875 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy & Fuels, online erschienen am 13.11.2026. Verfasst von Jin Chang und 5 weiteren Autor:innen. Die Arbeit nennt 74 Literaturangaben. Gefördert von: China National Petroleum Corporation, PetroChina, National Science and Technology Major Project.
Abstract (Originalsprache)
Natural-core flooding remains a benchmark for characterizing reservoir properties and multiphase transport. Its mechanistic value is nevertheless constrained by sample scarcity, opacity, heterogeneity, and limited repeatability. Three-dimensional (3D) printing and microfluidic fabrication provide complementary routes from digital pore models to controlled physical experiments. This critical review compares 3D-printed synthetic cores with microfluidic core chips across fabrication methods, material systems, surface functionalization, fluid–rock interactions, multiphase-flow visualization, and emerging geoenergy applications. We organize their validation through four progressive levels: geometric, petrophysical, interfacial, and behavioral equivalence. Available studies demonstrate reproducible control of selected pore-network statistics and transport responses. However, agreement in geometry, porosity, or absolute permeability alone does not establish multiphase-flow equivalence. The principal barriers include limited reproducibly open pore-throat size, residual fabrication material, unstable or nonrepresentative surface wettability, incomplete 3D saturation and relative-permeability metrology, and insufficient durability under high-temperature, high-pressure, and reactive conditions. We therefore argue for task-specific equivalence under matched thermodynamic conditions and dimensionless flow parameters, with acceptance limits defined against natural-core measurements and experimental uncertainty. A closed workflow linking digital design, fabrication, post-fabrication imaging, microfluidic screening, core-scale validation, natural-core calibration, and numerical inversion can convert artificial porous media from morphological replicas into reproducible experimental surrogates.
Förderung
- China National Petroleum Corporation
- PetroChina
- National Science and Technology Major Project
- Natural Science Foundation of Zhejiang Province
- Ningbo Municipality
Zitieren
APA
Chang, J., Hu, Z., Duan, X., Li, Y., Yu, Z., & Li, Y. (2026). From Geometric Similarity to Behavioral Equivalence: 3D-Printed Synthetic Cores and Microfluidic Core Chips. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.6c04875
Vancouver
Chang J, Hu Z, Duan X, Li Y, Yu Z, Li Y. From Geometric Similarity to Behavioral Equivalence: 3D-Printed Synthetic Cores and Microfluidic Core Chips. Energy & Fuels. 2026. doi:10.1021/acs.energyfuels.6c04875
BibTeX
@article{Chang2026,
author = {Chang, Jin and Hu, Zhiming and Duan, Xianggang and Li, Yalong and Yu, Zhe and Li, Yuanyuan},
title = {From Geometric Similarity to Behavioral Equivalence: 3D-Printed Synthetic Cores and Microfluidic Core Chips},
journal = {Energy & Fuels},
year = {2026},
doi = {10.1021/acs.energyfuels.6c04875}
}
EUVIMED