EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Moon Regolith Simulant-Based All-3D-Printed Triboelectric Nanogenerator for Effective Mechanical Energy Conversion

Alex Yohannan, Keval K Sonigara iD, Jayraj V Vaghasiya iD, Martin Pumera iD

Energy & Fuels · 19.02.2026 · 40 (7) · 3551-3561

DOI: 10.1021/acs.energyfuels.5c04047 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energy & Fuels, online erschienen am 04.02.2026. Verfasst von Alex Yohannan und 3 weiteren Autor:innen. Beteiligte Einrichtung: Future Energy and Innovation Laboratory, Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 61200, Czech Re…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, European Regional Development Fund, Ministerstvo ?kolstv?, Ml?de?e a Telov?chovy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Sustained human activity on the Moon will require energy systems that can be manufactured directly from lunar materials, avoiding the mass and cost constraints of transporting devices from the Earth. Here, we demonstrate a triboelectric nanogenerator (TENG) fabricated using a lunar regolith (LR) simulant as an active triboelectric component through a scalable 3D-printing strategy. LR incorporation significantly enhances charge generation in LR/PLA (poly-(lactic acid)) composite electrodes by modifying surface properties and increasing effective contact electrification. Multiple electrode architectures were evaluated to optimize performance, with the best design delivering an open-circuit voltage of ∼17.4 (±0.4) V and a short-circuit current of ∼0.96 (±0.2) μA at 10 Hz for a 20 × 30 mm device. The prototype is capable of real-scale power demonstrations, validating its practical utility. This work introduces a viable route for in situ resource utilization and 3D printing to establish LR-based triboelectric devices as a promising approach for energy autonomy in future lunar habitats.

Autor:innen und Institutionen

  • Future Energy and Innovation Laboratory, Central European Institute of Technology, Brno University of Technology, Purkyňova 123, Brno 61200, Czech Republic.
  • School of Biomedical Engineering, Faculty of Engineering, The University of Sydney, Sydney, NSW 2008, Australia.
  • Faculty of Electrical Engineering and Computer Science, VSB - Technical University of Ostrava, 17. listopadu 2172/15, 70800 Ostrava, Czech Republic.
  • Department of Medical Research, China Medical University Hospital, China Medical University, No. 91 Hsueh-Shih Road, Taichung 40402, Taiwan.
  • Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Korea.

ORCID-Profile: Keval K Sonigara, Jayraj V Vaghasiya, Martin Pumera

Förderung

  • European Commission
  • European Regional Development Fund
  • Ministerstvo ?kolstv?, Ml?de?e a Telov?chovy

Zitieren

APA

Yohannan, A., Sonigara, K. K., Vaghasiya, J. V., & Pumera, M. (2026). Moon Regolith Simulant-Based All-3D-Printed Triboelectric Nanogenerator for Effective Mechanical Energy Conversion. Energy & Fuels, 40(7), 3551-3561. https://doi.org/10.1021/acs.energyfuels.5c04047

Vancouver

Yohannan A, Sonigara KK, Vaghasiya JV, Pumera M. Moon Regolith Simulant-Based All-3D-Printed Triboelectric Nanogenerator for Effective Mechanical Energy Conversion. Energy & Fuels. 2026;40(7):3551-3561. doi:10.1021/acs.energyfuels.5c04047

BibTeX
@article{Yohannan2026,
  author = {Yohannan, Alex and Sonigara, Keval K and Vaghasiya, Jayraj V and Pumera, Martin},
  title = {Moon Regolith Simulant-Based All-3D-Printed Triboelectric Nanogenerator for Effective Mechanical Energy Conversion},
  journal = {Energy & Fuels},
  year = {2026},
  volume = {40},
  number = {7},
  pages = {3551--3561},
  doi = {10.1021/acs.energyfuels.5c04047}
}
Kostenlos starten →