Interlayer bonding testing fixture for 3D-printed TJC-1 lunar regolith simulant geopolymer
Advances in Cement Research · 03.11.2026 · 38 (11) · 728-732
DOI: 10.1680/jadcr.25.00212 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Cement Research, online erschienen am 17.02.2026. Verfasst von Jiajun Hu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 21 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The traditional interlayer bonding testing methods used for cement-based materials is not suitable for three-dimensional (3D)-printed geopolymers and they have some drawbacks that prevent efficient and accurate testing; accordingly there is an urgent need for a new testing method. In this briefing article, a newly designed fixture method (N-FM) was proposed to test the interlayer bonding strength of a 3D-printed geopolymer made from TJC-1 lunar regolith simulant as a case to show the improvement from the previously used traditional adherence method (T-AM). The results show that these two methods exhibit different failure modes. Interlayer failure, intralayer failure and epoxy resin detaching can be observed from the T-AM, while interlayer failure and diagonal failure can be observed from the N-FM. Compared to 50% by the T-AM, the success rate can be improved up to 90% by the N-FM and the distribution of data is more uniform. The 28-day interlayer bonding strength result from the N-FM was 2.16 MPa, which is considered to be more accurate, and is 30.91% higher than that of the T-AM.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Hu, J., Yu, K., & Guo, X. (2026). Interlayer bonding testing fixture for 3D-printed TJC-1 lunar regolith simulant geopolymer. Advances in Cement Research, 38(11), 728-732. https://doi.org/10.1680/jadcr.25.00212
Vancouver
Hu J, Yu K, Guo X. Interlayer bonding testing fixture for 3D-printed TJC-1 lunar regolith simulant geopolymer. Advances in Cement Research. 2026;38(11):728-732. doi:10.1680/jadcr.25.00212
BibTeX
@article{Hu2026,
author = {Hu, Jiajun and Yu, Kequan and Guo, Xiaolu},
title = {Interlayer bonding testing fixture for 3D-printed TJC-1 lunar regolith simulant geopolymer},
journal = {Advances in Cement Research},
year = {2026},
volume = {38},
number = {11},
pages = {728--732},
doi = {10.1680/jadcr.25.00212}
}
EUVIMED