Inkjet-Printed LSM-YSZ Thin Films for Enhanced Oxygen Electrodes in Solid Oxide Fuel Cells
Energy & Fuels · 01.08.2024 · 38 (15) · 14621-14631
DOI: 10.1021/acs.energyfuels.4c00673 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy & Fuels, online erschienen am 12.07.2024. Verfasst von Michalis Charalampakis und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, University of Crete, Vasilika Vouton, Heraklion 70013, Greece. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission.
Abstract (Originalsprache)
In the present work, symmetrical oxide ion conducting solid oxide single cells with inkjet-printed composite LSM-YSZ electrodes, onto commercially available YSZ dense substrates using GDC as buffer interlayer, were fabricated and characterized. Stable inkjet-printable LSM-YSZ nanoparticle inks were developed based on water solvent, after processing with high intensity ball milling. The deposition of LSM-YSZ electrodes was performed by inkjet printing, as well as a conventional additive manufacturing technique, screen printing, in order to compare the electrochemical performance of the produced cells for the reversible charge transfer reaction (O2 + 4 e- ↔ 2 O2-). The physicochemical properties of the LSM-YSZ nanoparticle ink was investigated to determine ink printability. The electrochemical performance of fabricated inkjet-printed and screen printed symmetrical cells (LSM-YSZ | GDC | YSZ | GDC | LSM-YSZ) exposed under a synthetic air atmosphere was evaluated in a single chamber cell reactor, employing the AC impedance spectroscopy and linear scan voltammetry techniques, at the temperature range of 700-850 °C. The inkjet-printed electrodes exhibited highly homogeneous and porous morphologies with the corresponding cell achieving current densities almost five times higher, up to 1 A/cm2 at 2 V cell potential and 850 °C, than those of the equivalent screen-printed one. To the best of our knowledge, this is the first successful implementation of water-based inks of LSM-YSZ electrodes in the fabrication of inkjet-printed solid oxide cells.
Autor:innen und Institutionen
- Department of Chemistry, University of Crete, Vasilika Vouton, Heraklion 70013, Greece.
- Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas, N. Plastira 100, Vasilika Vouton, Heraklion, Crete 70013, Greece.
- Department of Materials Science and Technology, University of Crete, Vasilika Vouton, Heraklion 70013, Greece.
- Chemical Process & Energy Resources Institute, Centre for Research & Technology Hellas, sixth km Harilaou-Thermis, Thessaloniki 57001, Greece.
- Department of Chemical Engineering, Aristotle University of Thessaloniki, University Campus, Thessaloniki 54124, Greece.
- Physical Chemistry Laboratory, Chemistry Department, Aristotle University of Thessaloniki, Faculty of Sciences, Thessaloniki 54124, Greece.
ORCID-Profile: Leila Zouridi, Ioannis Garagounis, Vassilios Binas
Förderung
- European Commission
Zitieren
APA
Charalampakis, M., Zouridi, L., Garagounis, I., Vourros, A., Marnellos, G. E., & Binas, V. (2024). Inkjet-Printed LSM-YSZ Thin Films for Enhanced Oxygen Electrodes in Solid Oxide Fuel Cells. Energy & Fuels, 38(15), 14621-14631. https://doi.org/10.1021/acs.energyfuels.4c00673
Vancouver
Charalampakis M, Zouridi L, Garagounis I, Vourros A, Marnellos GE, Binas V. Inkjet-Printed LSM-YSZ Thin Films for Enhanced Oxygen Electrodes in Solid Oxide Fuel Cells. Energy & Fuels. 2024;38(15):14621-14631. doi:10.1021/acs.energyfuels.4c00673
BibTeX
@article{Charalampakis2024,
author = {Charalampakis, Michalis and Zouridi, Leila and Garagounis, Ioannis and Vourros, Anastasios and Marnellos, George E and Binas, Vassilios},
title = {Inkjet-Printed LSM-YSZ Thin Films for Enhanced Oxygen Electrodes in Solid Oxide Fuel Cells},
journal = {Energy & Fuels},
year = {2024},
volume = {38},
number = {15},
pages = {14621--14631},
doi = {10.1021/acs.energyfuels.4c00673}
}
EUVIMED