EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

LaPrNiO 4 +δ Nano‐Columnar Thin Films as Oxygen Electrodes for Reversible Solid Oxide Cells

Silvère Panisset, Kosova Kreka, David Jauffres, Carmen Jiménez, Albert Tarancón, Mónica Burriel

ENERGY & ENVIRONMENTAL MATERIALS · 2026-01 · 9 (1)

DOI: 10.1002/eem2.70080 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ENERGY & ENVIRONMENTAL MATERIALS, online erschienen am 14.07.2025. Verfasst von Silvère Panisset und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Horizon 2020 Framework Programme, LabEx CEMAM.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work explores the potential of La 1‐x Pr x NiO 4+δ thin films fabricated by Pulsed Injection Metal–Organic Chemical Vapor Deposition as oxygen electrodes for low‐temperature solid oxide cells. La 1‐x Pr x NiO 4+δ materials offer promising mixed ionic and electronic conductivity and high oxygen reduction reaction kinetics. In this study, we focus on the microstructural and electrochemical properties of LaPrNiO 4+δ thin films deposited at various temperatures (600–650 °C), revealing that a two‐temperature deposition process yields nano‐architectured films with a dense bottom film and a porous nano‐columnar top layer of the same material. Electrochemical impedance spectroscopy and electrical conductivity relaxation experiments demonstrate enhanced surface exchange coefficients compared to bulk LaPrNiO 4+δ and La 2 NiO 4+δ and high performance, with polarization resistances as low as 0.10 Ω cm 2 at 600 °C and 1.00 at 500 °C. To better understand the electrochemical behavior of these electrodes, we investigated the limiting mechanisms of oxygen reduction by analyzing the kinetic response to varying oxygen partial pressures and performing detailed impedance analyses. These nano‐columnar LaPrNiO 4+δ oxygen electrodes were also deposited on commercial half‐cells, enabling the resulting full cells to operate successfully in both reversible solid oxide fuel cell and electrolysis cell modes, reaching a performance of 0.34 W cm −2 at 600 °C in reversible solid oxide fuel cell mode. This work underscores the promise of LaPrNiO 4+δ thin films for efficient low‐temperature‐solid oxide cells while addressing challenges in durability and stability.

Förderung

  • Horizon 2020 Framework Programme
  • LabEx CEMAM

Zitieren

APA

Panisset, S., Kreka, K., Jauffres, D., Jiménez, C., Tarancón, A., & Burriel, M. (2026). LaPrNiO 4 +δ Nano‐Columnar Thin Films as Oxygen Electrodes for Reversible Solid Oxide Cells. ENERGY & ENVIRONMENTAL MATERIALS, 9(1). https://doi.org/10.1002/eem2.70080

Vancouver

Panisset S, Kreka K, Jauffres D, Jiménez C, Tarancón A, Burriel M. LaPrNiO 4 +δ Nano‐Columnar Thin Films as Oxygen Electrodes for Reversible Solid Oxide Cells. ENERGY & ENVIRONMENTAL MATERIALS. 2026;9(1). doi:10.1002/eem2.70080

BibTeX
@article{Panisset2026,
  author = {Panisset, Silvère and Kreka, Kosova and Jauffres, David and Jiménez, Carmen and Tarancón, Albert and Burriel, Mónica},
  title = {LaPrNiO 4 +δ Nano‐Columnar Thin Films as Oxygen Electrodes for Reversible Solid Oxide Cells},
  journal = {ENERGY & ENVIRONMENTAL MATERIALS},
  year = {2026},
  volume = {9},
  number = {1},
  doi = {10.1002/eem2.70080}
}
Kostenlos starten →