EUVIMEDEUVIMED entdecken
Übersichtsarbeit

Development and Prospects of Zirconia 3D Printing for Artificial Prosthesis Applications

Hyein Lee, Dong-Hyun Lee, Jiyu Hyun iD, Hyun Su Park, Gun-Jae Jeong iD, Kwang-Ho Jo, Sang-Kyu Lee, Kyoung-Jun Jang, Suk Ho Bhang iD, Taekyung Yu iD

Chemical Reviews · 12.08.2026 · 126 (15) · 8203-8233

DOI: 10.1021/acs.chemrev.5c00650 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Chemical Reviews, online erschienen am 24.07.2026. Verfasst von Hyein Lee und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering, College of Engineering, Integrated Engineering Major, Kyunghee University, Yongin17140, Republic of Korea. Hauptthemen laut MEDLINE: Zirconium, Printing, Three-Dimensional. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 326 Literaturangaben. Gefördert von: Korea Evaluation Institute of Industrial Technology, National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Artificial prosthetic manufacturing is moving toward patient-specific design and production, and zirconia-based three-dimensional printing is emerging as a promising approach because of its mechanical properties and biocompatibility. Yet the step from laboratory development to clinical use is still limited by the gap between laboratory-scale process optimization and clinically relevant validation of performance, reproducibility, and long-term reliability. This review provides an application-oriented overview of zirconia-based photopolymerization additive manufacturing for dental, orthopedic, and scaffold applications, discussing relevant functional requirements alongside key processing parameters, postprocessing steps, and quality-critical variables. We outline major bottlenecks, such as optical scattering and slurry rheology during fabrication, as well as defects and dimensional deviations introduced during debinding and sintering, and we discuss recent performance-oriented strategies, including triply periodic minimal surface (TPMS) architectures and functionally graded additive manufacturing (FGAM) routes. Finally, we highlight the critical requirements for clinical translation, including qualification-ready process control, lot-to-lot manufacturing consistency, and robust durability validation under clinically relevant conditions. Taken together, these aspects establish a process–defect–performance relationship, where photopolymerization parameters govern defect evolution during debinding and sintering and, ultimately, determine the mechanical reliability and clinical performance of zirconia-based prostheses. Addressing these challenges will be essential for bridging the gap between laboratory-scale demonstrations and the scalable production of patient-specific zirconia prostheses.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ZirconiumPrinting, Three-DimensionalHumansBiocompatible Materials

Substanzen

Zirconiumzirconium oxideBiocompatible Materials

Autor:innen und Institutionen

  • Department of Chemical Engineering, College of Engineering, Integrated Engineering Major, Kyunghee University, Yongin17140, Republic of Korea.
  • School of Chemical Engineering, Sungkyunkwan University, Suwon16419, Republic of Korea.
  • School of Nanomedical Engineering, Korea National University of Transportation, Chungju27469, Republic of Korea.
  • Research Institute, 3D Controls Co., Busan46721, Republic of Korea.

ORCID-Profile: Jiyu Hyun, Gun-Jae Jeong, Suk Ho Bhang, Taekyung Yu

Förderung

  • Korea Evaluation Institute of Industrial Technology
  • National Research Foundation of Korea

Zitieren

APA

Lee, H., Lee, D. H., Hyun, J., Park, H. S., Jeong, G. J., Jo, K. H., Lee, S. K., Jang, K. J., Bhang, S. H., & Yu, T. (2026). Development and Prospects of Zirconia 3D Printing for Artificial Prosthesis Applications. Chemical Reviews, 126(15), 8203-8233. https://doi.org/10.1021/acs.chemrev.5c00650

Vancouver

Lee H, Lee DH, Hyun J, Park HS, Jeong GJ, Jo KH, et al. Development and Prospects of Zirconia 3D Printing for Artificial Prosthesis Applications. Chemical Reviews. 2026;126(15):8203-8233. doi:10.1021/acs.chemrev.5c00650

BibTeX
@article{Lee2026,
  author = {Lee, Hyein and Lee, Dong-Hyun and Hyun, Jiyu and Park, Hyun Su and Jeong, Gun-Jae and Jo, Kwang-Ho and Lee, Sang-Kyu and Jang, Kyoung-Jun and Bhang, Suk Ho and Yu, Taekyung},
  title = {Development and Prospects of Zirconia 3D Printing for Artificial Prosthesis Applications},
  journal = {Chemical Reviews},
  year = {2026},
  volume = {126},
  number = {15},
  pages = {8203--8233},
  doi = {10.1021/acs.chemrev.5c00650}
}
Kostenlos starten →