EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Defect Engineering of Mo 2– x CT z MXenes through Precursor Alloying and Effects on Electrochemical Properties

Rodrigo M Ronchi iD, Ningjun Chen, Joseph Halim iD, Per O Å Persson iD, Johanna Rosen iD

Chemistry of Materials · 10.06.2025 · 37 (11) · 4005-4015

DOI: 10.1021/acs.chemmater.5c00143 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Chemistry of Materials, online erschienen am 30.05.2025. Verfasst von Rodrigo M Ronchi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Materials Design Division, Department of Physics, Chemistry, and Biology (IFM), Linköping University, SE-581 83 Linköping, Sweden. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Knut och Alice Wallenbergs Stiftelse, Sveriges Regering, H2020 European Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Defect engineering in the form of the intentional creation of defects has been shown to enhance the properties of two-dimensional materials in various applications. Herein, we systematically explore a simple and reproducible method for introducing random vacancies and pores in Mo-based MXenes by combining first-principles calculations and experiments. The process is based on alloying Mo2Ga2C with Cr, which is an element that, together with Ga, is selectively etched in hydrofluoric acid, resulting in vacancies and vacancy clusters in the MXene sheets. The limit of Cr incorporation on the metal site was found to be approximately 60 atom % in the precursor powder Mo2-x Cr x C. Lower concentrations, up to 25 atom %, were used in the subsequent synthesis of Mo2-x Cr x Ga2C, since an increasing Cr content promoted the formation of another MAX phase (Mo2-x Cr x GaC). A Mo1.87CT z MXene derived from Mo1.87Cr0.13Ga2C (6.5 atom % Cr) exhibited excellent electrochemical behavior, reaching a volumetric capacitance of 1117 Fcm-3 at 2 mVs-1 scan rate, and suggested that defect concentration can be used to tune the rate capability. Overall, we have demonstrated that using Cr as a sacrificial element in the MAX phase is a simple and effective strategy for the defect engineering of MXenes. Moreover, this method can likely be extended to include other sacrificial elements and MAX phases, making MXene defect engineering a viable pathway for property enhancement across various applications, including energy storage and catalysis.

Autor:innen und Institutionen

  • Materials Design Division, Department of Physics, Chemistry, and Biology (IFM), Linköping University, SE-581 83 Linköping, Sweden.
  • Thin Film Physics Division, Department of Physics, Chemistry, and Biology (IFM), Linköping University, SE-581 83 Linköping, Sweden.

ORCID-Profile: Rodrigo M Ronchi, Joseph Halim, Per O Å Persson, Johanna Rosen

Förderung

  • Knut och Alice Wallenbergs Stiftelse
  • Sveriges Regering
  • H2020 European Research Council

Zitieren

APA

Ronchi, R. M., Chen, N., Halim, J., Persson, P. O. Å., & Rosen, J. (2025). Defect Engineering of Mo 2– x CT z MXenes through Precursor Alloying and Effects on Electrochemical Properties. Chemistry of Materials, 37(11), 4005-4015. https://doi.org/10.1021/acs.chemmater.5c00143

Vancouver

Ronchi RM, Chen N, Halim J, Persson POÅ, Rosen J. Defect Engineering of Mo 2– x CT z MXenes through Precursor Alloying and Effects on Electrochemical Properties. Chemistry of Materials. 2025;37(11):4005-4015. doi:10.1021/acs.chemmater.5c00143

BibTeX
@article{Ronchi2025,
  author = {Ronchi, Rodrigo M and Chen, Ningjun and Halim, Joseph and Persson, Per O Å and Rosen, Johanna},
  title = {Defect Engineering of Mo 2– x CT z MXenes through Precursor Alloying and Effects on Electrochemical Properties},
  journal = {Chemistry of Materials},
  year = {2025},
  volume = {37},
  number = {11},
  pages = {4005--4015},
  doi = {10.1021/acs.chemmater.5c00143}
}
Kostenlos starten →