EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Drag and yielding of rotating bodies in yield-stress fluids

Farshad Nazari, Akash Mittal, Kourosh Shoele, Hadi Mohammadigoushki

Journal of Fluid Mechanics · 10.07.2026 · 1038

DOI: 10.1017/jfm.2026.11782 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 08.07.2026. Verfasst von Farshad Nazari und 3 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We investigate the settling dynamics of rotating objects in a yield-stress fluid by combining controlled experiments with numerical simulations. Experiments were conducted using cylinders and spheres of varying surface roughness, rotated within a Helmholtz coil and immersed in a Carbopol-based yield-stress fluid. Complementary numerical simulations employed a viscoplastic Herschel–Bulkley model to capture the coupled effects of sedimentation and rotation. To parametrise the problem, we define a dimensionless rotational velocity ModifyingAbove upper Omega With caret Ω ^ $\hat {\varOmega }$ to characterise rotation and the Bingham number ( italic Bi Bi $\textit{Bi}$ ) to characterise sedimentation. Measurements of the drag coefficient show a strong dependence on both surface roughness and rotation rate. The plastic drag coefficient is found to be inversely related to ModifyingAbove upper Omega With caret Ω ^ $\hat {\varOmega }$ at fixed italic Bi Bi $\textit{Bi}$ , with rotation effectively reducing the resistance to motion. Flow visualisation reveals that enhanced rotation generates a plastic deformation zone in the orthogonal plane and promotes wall slip; while at low ModifyingAbove upper Omega With caret Ω ^ $\hat {\varOmega }$ , a stagnation-point flow develops in the wake, gradually weakening and disappearing as ModifyingAbove upper Omega With caret Ω ^ $\hat {\varOmega }$ increases. In addition, the plastic drag coefficient decreases with increasing italic Bi Bi $\textit{Bi}$ and approaches an asymptotic plateau at high italic Bi Bi $\textit{Bi}$ . Numerical simulations reproduce the general scaling of drag with ModifyingAbove upper Omega With caret Ω ^ $\hat {\varOmega }$ and italic Bi Bi $\textit{Bi}$ , but consistently underpredict experimental values, likely due to wall slip and nonlinear effects such as the stagnation-point flow not present in the model. The onset of sedimentation (yield limit) was also measured and found to increase with increasing rotation and to depend on surface roughness. Finally, simulations highlight scaling relations for drag coefficient providing new insight into the interplay of sedimentation, rotation and viscoplastic rheology.

Förderung

  • National Science Foundation

Zitieren

APA

Nazari, F., Mittal, A., Shoele, K., & Mohammadigoushki, H. (2026). Drag and yielding of rotating bodies in yield-stress fluids. Journal of Fluid Mechanics, 1038. https://doi.org/10.1017/jfm.2026.11782

Vancouver

Nazari F, Mittal A, Shoele K, Mohammadigoushki H. Drag and yielding of rotating bodies in yield-stress fluids. Journal of Fluid Mechanics. 2026;1038. doi:10.1017/jfm.2026.11782

BibTeX
@article{Nazari2026,
  author = {Nazari, Farshad and Mittal, Akash and Shoele, Kourosh and Mohammadigoushki, Hadi},
  title = {Drag and yielding of rotating bodies in yield-stress fluids},
  journal = {Journal of Fluid Mechanics},
  year = {2026},
  volume = {1038},
  doi = {10.1017/jfm.2026.11782}
}
Kostenlos starten →