No yield stress required: Stress-activated flow in simple yield-stress fluids
Journal of Rheology · 01.03.2024 · 68 (2) · 155-170
DOI: 10.1122/8.0000748 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Rheology, online erschienen am 23.01.2024. Verfasst von G. Pagani und 4 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 76 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Eidgenössische Technische Hochschule Zürich, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung.
Abstract (Originalsprache)
An elastoviscoplastic constitutive equation is proposed to describe both the elastic and rate-dependent plastic deformation behavior of Carbopol® dispersions, commonly used to study yield-stress fluids. The model, a variant of the nonlinear Maxwell model with stress-dependent relaxation time, eliminates the need for a separate Herschel–Bulkley yield stress. The stress dependence of the viscosity was determined experimentally by evaluating the steady-state flow stress at a constant applied shear rate and by measuring the steady-state creep rate at constant applied shear stress. Experimentally, the viscosity’s stress-dependence was confirmed to follow the Ree–Eyring model. Furthermore, it is shown that the Carbopol® dispersions used here obey time-stress superposition, indicating that all relaxation times experience the same stress dependence. This was demonstrated by building a compliance mastercurve using horizontal shifting on a logarithmic time axis of creep curves measured at different stress levels and by constructing mastercurves of the storage- and loss-modulus curves determined independently by orthogonal superposition measurements at different applied constant shear stresses. Overall, the key feature of the proposed constitutive equation is its incorporation of a nonlinear stress-activated change in relaxation time, which enables a smooth transition from elastic to viscous behavior during start-up flow experiments. This approach bypasses the need for a distinct Herschel–Bulkley yield stress as a separate material characteristic. Additionally, the model successfully replicates the observed steady-state flow stress in transient-flow scenarios and the steady-state flow rate in creep experiments, underlining its effectiveness in capturing the material’s dynamic response. Finally, the one-dimensional description is readily extended to a full three-dimensional finite-strain elastoviscoplastic constitutive equation.
Förderung
- Eidgenössische Technische Hochschule Zürich
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
Zitieren
APA
Pagani, G., Hofmann, M., Govaert, L. E., Tervoort, T. A., & Vermant, J. (2024). No yield stress required: Stress-activated flow in simple yield-stress fluids. Journal of Rheology, 68(2), 155-170. https://doi.org/10.1122/8.0000748
Vancouver
Pagani G, Hofmann M, Govaert LE, Tervoort TA, Vermant J. No yield stress required: Stress-activated flow in simple yield-stress fluids. Journal of Rheology. 2024;68(2):155-170. doi:10.1122/8.0000748
BibTeX
@article{Pagani2024,
author = {Pagani, G. and Hofmann, M. and Govaert, L. E. and Tervoort, T. A. and Vermant, J.},
title = {No yield stress required: Stress-activated flow in simple yield-stress fluids},
journal = {Journal of Rheology},
year = {2024},
volume = {68},
number = {2},
pages = {155--170},
doi = {10.1122/8.0000748}
}
EUVIMED