EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stochastic modelling of the instantaneous velocity profile in rough-wall turbulent boundary layers

Roozbeh Ehsani, Michael Heisel, Jiaqi Li, Vaughan Voller, Jiarong Hong, Michele Guala

Journal of Fluid Mechanics · 25.01.2024 · 979

DOI: 10.1017/jfm.2023.999 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 11.01.2024. Verfasst von Roozbeh Ehsani und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 82 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Division of Chemical, Bioengineering, Environmental, and Transport Systems.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The statistical properties of uniform momentum zones (UMZs) are extracted from laboratory and field measurements in rough wall turbulent boundary layers to formulate a set of stochastic models for the simulation of instantaneous velocity profiles. A spatiotemporally resolved velocity dataset, covering a field of view of $8 \times 9\,{\rm m}^2$ , was obtained in the atmospheric surface layer using super-large-scale particle image velocimetry (SLPIV), as part of the Grand-scale Atmospheric Imaging Apparatus (GAIA). Wind tunnel data from a previous study are included for comparison (Heisel et al. , J. Fluid Mech. , vol. 887, 2020, R1). The probability density function of UMZ attributes such as their thickness, modal velocity and averaged vertical velocity are built at varying elevations and modelled using log-normal and Gaussian distributions. Inverse transform sampling of the distributions is used to generate synthetic step-like velocity profiles that are spatially and temporally uncorrelated. Results show that in the wide range of wall-normal distances and $Re_\tau$ up to $\sim O(10^6)$ investigated here, shear velocity scaling is manifested in the velocity jump across shear interfaces between adjacent UMZs, and attached eddy behaviour is observed in the linear proportionality between UMZ thickness and their wall normal location. These very same characteristics are recovered in the generated instantaneous profiles, using both fully stochastic and data-driven hybrid stochastic (DHS) models, which address, in different ways, the coupling between modal velocities and UMZ thickness. Our method provides a stochastic approach for generating an ensemble of instantaneous velocity profiles, consistent with the structural organisation of UMZs, where the ensemble reproduces the logarithmic mean velocity profile and recovers significant portions of the Reynolds stresses and, thus, of the streamwise and vertical velocity variability.

Förderung

  • Division of Chemical, Bioengineering, Environmental, and Transport Systems

Zitieren

APA

Ehsani, R., Heisel, M., Li, J., Voller, V., Hong, J., & Guala, M. (2024). Stochastic modelling of the instantaneous velocity profile in rough-wall turbulent boundary layers. Journal of Fluid Mechanics, 979. https://doi.org/10.1017/jfm.2023.999

Vancouver

Ehsani R, Heisel M, Li J, Voller V, Hong J, Guala M. Stochastic modelling of the instantaneous velocity profile in rough-wall turbulent boundary layers. Journal of Fluid Mechanics. 2024;979. doi:10.1017/jfm.2023.999

BibTeX
@article{Ehsani2024,
  author = {Ehsani, Roozbeh and Heisel, Michael and Li, Jiaqi and Voller, Vaughan and Hong, Jiarong and Guala, Michele},
  title = {Stochastic modelling of the instantaneous velocity profile in rough-wall turbulent boundary layers},
  journal = {Journal of Fluid Mechanics},
  year = {2024},
  volume = {979},
  doi = {10.1017/jfm.2023.999}
}
Kostenlos starten →