EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Near-wall model for compressible turbulent boundary layers based on an inverse velocity transformation

Kevin P. Griffin, Lin Fu, Parviz Moin

Journal of Fluid Mechanics · 10.09.2023 · 970

DOI: 10.1017/jfm.2023.627 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluid Mechanics, online erschienen am 04.09.2023. Verfasst von Kevin P. Griffin und 2 weiteren Autor:innen. Die Arbeit wurde bisher 47-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, a near-wall model, which couples the inverse of a recently developed compressible velocity transformation (Griffin et al. , Proc. Natl Acad. Sci. , vol. 118, 2021, p. 34) and an algebraic temperature–velocity relation, is developed for high-speed turbulent boundary layers. As input, the model requires the mean flow state at one wall-normal height in the inner layer of the boundary layer and at the boundary-layer edge. As output, the model can predict mean temperature and velocity profiles across the entire inner layer, as well as the wall shear stress and heat flux. The model is tested in an a priori sense using a wide database of direct numerical simulation high-Mach-number turbulent channel flows, pipe flows and boundary layers (48 cases, with edge Mach numbers in the range 0.77–11, and semi-local friction Reynolds numbers in the range 170–5700). The present model is significantly more accurate than the classical ordinary differential equation (ODE) model for all cases tested. The model is deployed as a wall model for large-eddy simulations in channel flows with bulk Mach numbers in the range 0.7–4 and friction Reynolds numbers in the range 320–1800. When compared to the classical framework, in the a posteriori sense, the present method greatly improves the predicted heat flux, wall stress, and temperature and velocity profiles, especially in cases with strong heat transfer. In addition, the present model solves one ODE instead of two, and has a computational cost and implementation complexity similar to that of the commonly used ODE model.

Zitieren

APA

Griffin, K. P., Fu, L., & Moin, P. (2023). Near-wall model for compressible turbulent boundary layers based on an inverse velocity transformation. Journal of Fluid Mechanics, 970. https://doi.org/10.1017/jfm.2023.627

Vancouver

Griffin KP, Fu L, Moin P. Near-wall model for compressible turbulent boundary layers based on an inverse velocity transformation. Journal of Fluid Mechanics. 2023;970. doi:10.1017/jfm.2023.627

BibTeX
@article{Griffin2023,
  author = {Griffin, Kevin P. and Fu, Lin and Moin, Parviz},
  title = {Near-wall model for compressible turbulent boundary layers based on an inverse velocity transformation},
  journal = {Journal of Fluid Mechanics},
  year = {2023},
  volume = {970},
  doi = {10.1017/jfm.2023.627}
}
Kostenlos starten →