EUVIMEDEUVIMED entdecken
Crossref

Integration of rough RTP absorbers into CIGS-perovskite monolithic tandems by NiOx(:Cu)+SAM Hole-transporting Bi-layers

Ivona Kafedjiska, Guillermo A. Farias-Basulto, Pablo Reyes-Figueroa, Tobias Bertram, Amran Al-Ashouri, Christian A. Kaufmann, Robert Wenisch, Steve Albrecht, Rutger Schlatmann, Iver Lauermann

Solar Energy Materials and Solar Cells · 2023-06 · 254 · 112248

DOI: 10.1016/j.solmat.2023.112248 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solar Energy Materials and Solar Cells, 2023-06. Verfasst von Ivona Kafedjiska und 9 weiteren Autor:innen. Die Arbeit wurde bisher 33-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: Bundesministerium für Wirtschaft und Energie.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We investigate the performance of monolithic copper-indium-gallium-selenide (CIGS)/perovskite tandem solar cells with two different CIGS bottom device absorbers: Cu(In,Ga)Se 2 or Cu(In,Ga)(S,Se) 2 and with three different hole-transporting layers (HTLs): NiO x + SAM, NiO x :Cu + SAM and SAM alone. NiO x (:Cu) is (2 wt.% copper-doped) nickel oxide and SAM is the MeO-2PACz ([2-(3,6-dimethoxy-9H-carbazol-9-yl)ethyl]phosphonic acid) self-assembled monolayer. The CIGSe is fabricated by physical-vapour deposition (PVD), has a E g ~ 1.06 e V, and a σ RMS,PVD ~ 65nm, while the CIGSSe is fabricated by rapid-thermal processing (RTP), has a E g ~ 1.01 e V, and a σ RMS,RTP ~ 120nm. While the current certified, 24.2%-efficient, world-record monolithic CIGSe-perovskite tandem solar cell has previously been achieved with SAM as a stand-alone HTL, this work investigates whether SAM can yield similarly high efficiencies also on industrially compatible, very rough RTP CIGSSe absorbers. We find that the devices with SAM as stand-alone HTL suffer from severe FF and V oc losses and that NiO x :Cu is needed to act as a shunt-quenching layer below that SAM, ensuring conformal coverage of the rough bottom sub-cell surface. Within this work the highest-achieved (in-house measured) PCE s for the RTP and PVD CIGS-based tandems are 21.6% and 23.2% respectively, on a cell area of 1.08cm 2 , both of which are obtained with NiO x :Cu + SAM as an HTL.

Förderung

  • Bundesministerium für Wirtschaft und Energie

Zitieren

APA

Kafedjiska, I., Farias-Basulto, G. A., Reyes-Figueroa, P., Bertram, T., Al-Ashouri, A., Kaufmann, C. A., Wenisch, R., Albrecht, S., Schlatmann, R., & Lauermann, I. (2023). Integration of rough RTP absorbers into CIGS-perovskite monolithic tandems by NiOx(:Cu)+SAM Hole-transporting Bi-layers. Solar Energy Materials and Solar Cells, 254, 112248. https://doi.org/10.1016/j.solmat.2023.112248

Vancouver

Kafedjiska I, Farias-Basulto GA, Reyes-Figueroa P, Bertram T, Al-Ashouri A, Kaufmann CA, et al. Integration of rough RTP absorbers into CIGS-perovskite monolithic tandems by NiOx(:Cu)+SAM Hole-transporting Bi-layers. Solar Energy Materials and Solar Cells. 2023;254:112248. doi:10.1016/j.solmat.2023.112248

BibTeX
@article{Kafedjiska2023,
  author = {Kafedjiska, Ivona and Farias-Basulto, Guillermo A. and Reyes-Figueroa, Pablo and Bertram, Tobias and Al-Ashouri, Amran and Kaufmann, Christian A. and Wenisch, Robert and Albrecht, Steve and Schlatmann, Rutger and Lauermann, Iver},
  title = {Integration of rough RTP absorbers into CIGS-perovskite monolithic tandems by NiOx(:Cu)+SAM Hole-transporting Bi-layers},
  journal = {Solar Energy Materials and Solar Cells},
  year = {2023},
  volume = {254},
  pages = {112248},
  doi = {10.1016/j.solmat.2023.112248}
}
Kostenlos starten →