Advanced Characterization and Optimization of NiO x :Cu‐SAM Hole‐Transporting Bi‐Layer for 23.4% Efficient Monolithic Cu(In,Ga)Se 2 ‐Perovskite Tandem Solar Cells
Advanced Functional Materials · 2023-08 · 33 (34)
DOI: 10.1002/adfm.202302924 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Functional Materials, online erschienen am 25.05.2023. Verfasst von Ivona Kafedjiska und 9 weiteren Autor:innen. Die Arbeit wurde bisher 62-mal zitiert (Crossref) und nennt 103 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung, Bundesministerium für Wirtschaft und Energie, Bundesministerium für Wirtschaft und Technologie.
Abstract (Originalsprache)
The performance of five hole‐transporting layers (HTLs) is investigated in both single‐junction perovskite and Cu(In, Ga)Se 2 (CIGSe)‐perovskite tandem solar cells: nickel oxide (NiO x ,), copper‐doped nickel oxide (NiO x :Cu), NiO x +SAM, NiO x :Cu+SAM, and SAM, where SAM is the [2‐(3,‐6Dimethoxy‐9H‐carbazol‐9yl)ethyl]phosphonic acid (MeO‐2PACz) self‐assembled monolayer. The performance of the devices is correlated to the charge‐carrier dynamics at the HTL/perovskite interface and the limiting factors of these HTLs are analyzed by performing time‐resolved and absolute photoluminescence ((Tr)PL), transient surface photovoltage (tr‐SPV), and X‐ray/UV photoemission spectroscopy (XPS/UPS) measurements on indium tin oxide (ITO)/HTL/perovskite and CIGSe/HTL/perovskite stacks. A high quasi‐Fermi level splitting to open‐circuit (QFLS‐ V oc ) deficit is detected for the NiO x ‐based devices, attributed to electron trapping and poor hole extraction at the NiO x ‐perovskite interface and a low carrier effective lifetime in the bulk of the perovskite. Simultaneously, doping the NiO x with 2% Cu and passivating its surface with MeO‐2PACz suppresses the electron trapping, enhances the holes extraction, reduces the non‐radiative interfacial recombination, and improves the band alignment. Due to this superior interfacial charge‐carrier dynamics, NiO x :Cu+SAM is found to be the most suitable HTL for the monolithic CIGSe‐perovskite tandem devices, enabling a power‐conversion efficiency ( PCE ) of 23.4%, V oc of 1.72V, and a fill factor ( FF ) of 71%, while the remaining four HTLs suffer from prominent V oc and FF losses.
Förderung
- Bundesministerium für Bildung und Forschung
- Bundesministerium für Wirtschaft und Energie
- Bundesministerium für Wirtschaft und Technologie
Zitieren
APA
Kafedjiska, I., Levine, I., Musiienko, A., Maticiuc, N., Bertram, T., Al‐Ashouri, A., Kaufmann, C. A., Albrecht, S., Schlatmann, R., & Lauermann, I. (2023). Advanced Characterization and Optimization of NiO x :Cu‐SAM Hole‐Transporting Bi‐Layer for 23.4% Efficient Monolithic Cu(In,Ga)Se 2 ‐Perovskite Tandem Solar Cells. Advanced Functional Materials, 33(34). https://doi.org/10.1002/adfm.202302924
Vancouver
Kafedjiska I, Levine I, Musiienko A, Maticiuc N, Bertram T, Al‐Ashouri A, et al. Advanced Characterization and Optimization of NiO x :Cu‐SAM Hole‐Transporting Bi‐Layer for 23.4% Efficient Monolithic Cu(In,Ga)Se 2 ‐Perovskite Tandem Solar Cells. Advanced Functional Materials. 2023;33(34). doi:10.1002/adfm.202302924
BibTeX
@article{Kafedjiska2023,
author = {Kafedjiska, Ivona and Levine, Igal and Musiienko, Artem and Maticiuc, Natalia and Bertram, Tobias and Al‐Ashouri, Amran and Kaufmann, Christian A. and Albrecht, Steve and Schlatmann, Rutger and Lauermann, Iver},
title = {Advanced Characterization and Optimization of NiO x :Cu‐SAM Hole‐Transporting Bi‐Layer for 23.4% Efficient Monolithic Cu(In,Ga)Se 2 ‐Perovskite Tandem Solar Cells},
journal = {Advanced Functional Materials},
year = {2023},
volume = {33},
number = {34},
doi = {10.1002/adfm.202302924}
}
EUVIMED