EUVIMEDEUVIMED entdecken
Crossref

Three-dimensionally printed denture base resins modified with green-synthesized TiO2 nanoparticles: A multiparametric assessment

Amr Azab, Dina Abozaid, Mohammed H Ahmed, Pansai A Mohamed

The Journal of Prosthetic Dentistry · 2026

DOI: 10.1016/j.prosdent.2026.03.045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2026. Verfasst von Amr Azab und 3 weiteren Autor:innen. Beteiligte Einrichtung: Lecturer of Prosthodontics, Department of Prosthodontics, Faculty of Dentistry, Tanta University, Tanta, Egypt; Lecturer of Prosthodontics, Departmen…. Hauptthemen laut MEDLINE: Titanium, Denture Bases, Printing, Three-Dimensional, Nanoparticles. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 45 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: Three-dimensionally (3D) printed denture base resins offer advantages in digitally assisted dentistry but still show inferior mechanical performance and color stability compared with conventional and milled resins. Green-synthesized titanium dioxide nanoparticles (TiO₂NPs) may provide improved dispersion and reduced agglomeration compared with chemically synthesized forms, potentially enhancing the performance of printed resins. PURPOSE: The purpose of this in vitro study was to evaluate the effect of incorporating TiO₂NPs, green-synthesized utilizing grape seed extract (GSE-TiO₂NPs), on the biaxial flexural strength (BFS), Weibull reliability, microhardness, surface roughness, and color stability of a 3D printed denture base resin before and after thermocycling. MATERIAL AND METHODS: GSE-TiO₂NPs were synthesized, transmission electron microscope (TEM)-characterized, silanized, and incorporated into a printable denture base resin at 0.5 wt% and 0.75 wt%. Disk specimens were 3D printed and assigned to control, 0.5 wt% TiO₂, and 0.75% TiO₂ groups. BFS (n=24/group), Vickers microhardness, surface roughness, and color difference (ΔE00) (n=12/group) were evaluated before and after 600 thermocycles (between 5 °C and 55 °C). The data were analyzed using a statistical software program (jamovi v2.6.44). BFS was analyzed using robust ANOVA (20% trimmed means, bootstrap CIs) with robust post hoc tests. Microhardness and surface roughness were evaluated using linear mixed-effects models with Bonferroni-adjusted post hoc tests. The Mann-Whitney U test was used for color change assessment, and the Kruskal-Wallis test, followed by the Dunn post hoc test with Bonferroni correction were used to compare the percentage and ∆E change among groups (α=.05). RESULTS: TEM showed quasispherical nanoparticles (mean size 11.8 nm). Increasing TiO₂NP concentration produced a significant rise in BFS (P

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

TitaniumDenture BasesPrinting, Three-DimensionalNanoparticlesDental MaterialsAcrylic ResinsSurface PropertiesHardnessColorMaterials TestingFlexural StrengthGrape Seed ExtractGreen Chemistry TechnologyHumansMicroscopy, Electron, Transmission

Substanzen

Titaniumtitanium dioxideGrape Seed ExtractDental MaterialsAcrylic Resins

Autor:innen und Institutionen

  • Lecturer of Prosthodontics, Department of Prosthodontics, Faculty of Dentistry, Tanta University, Tanta, Egypt; Lecturer of Prosthodontics, Department of Prosthodontics, Faculty of Dentistry, Alsalam University, Tanta,…
  • Assistant Lecturer of Dental Biomaterials, Department of Dental Biomaterials, Faculty of Dentistry, Tanta University, Tanta, Egypt. Electronic address: dina_ezzat@dent.tanta.edu.eg.
  • Associate Professor of Dental Biomaterials, Department of Dental Biomaterials, Faculty of Dentistry, Tanta University, Tanta, Egypt; Vrije Universiteit Brussel, Faculteit Geneeskunde & Farmacie, Clinical Sciences, Denti…
  • Assistant Lecturer of Dental Biomaterials, Department of Dental Biomaterials, Faculty of Dentistry, Alexandria University, Alexandria, Egypt.

Zitieren

APA

Azab, A., Abozaid, D., Ahmed, M. H., & Mohamed, P. A. (2026). Three-dimensionally printed denture base resins modified with green-synthesized TiO2 nanoparticles: A multiparametric assessment. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2026.03.045

Vancouver

Azab A, Abozaid D, Ahmed MH, Mohamed PA. Three-dimensionally printed denture base resins modified with green-synthesized TiO2 nanoparticles: A multiparametric assessment. The Journal of Prosthetic Dentistry. 2026. doi:10.1016/j.prosdent.2026.03.045

BibTeX
@article{Azab2026,
  author = {Azab, Amr and Abozaid, Dina and Ahmed, Mohammed H and Mohamed, Pansai A},
  title = {Three-dimensionally printed denture base resins modified with green-synthesized TiO2 nanoparticles: A multiparametric assessment},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2026},
  doi = {10.1016/j.prosdent.2026.03.045}
}
Kostenlos starten →