Assessing impact of titanium dioxide nanotube incorporation on the glass transition temperature and thermal stability of 3D printed complete denture base resin
The Journal of Prosthetic Dentistry · 2026
DOI: 10.1016/j.prosdent.2026.01.009 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2026. Verfasst von Zaid Basil Al-Enbary und 2 weiteren Autor:innen. Beteiligte Einrichtung: Master's student, Department of Prosthodontics, College of Dentistry, University of Baghdad, Baghdad, Iraq; Assistant Lecturer, Department of Prostho…. Hauptthemen laut MEDLINE: Titanium, Denture Bases, Printing, Three-Dimensional, Glass. Die Arbeit nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: University of Baghdad.
Abstract (Originalsprache)
STATEMENT OF PROBLEM: The suboptimal thermal and thermomechanical performance of 3-dimensionally (3D) printed complete dentures limits their functional longevity. Whether incorporating titanium dioxide (TiO2) nanotubes (NTs) into 3D printed denture base resins improves their properties is unknown. PURPOSE: The purpose of this in vitro study was to evaluate the effects of incorporating TiO2 NTs into 3D printed denture base resin on the glass transition temperature (Tg), thermal stability, and a thermomechanical property (elastic modulus [EM]) as a function of temperature change. MATERIAL AND METHODS: TiO2 NTs (Ø30 to 85 nm×1 to 3 µm) were added to the denture base resin at 0.0 wt% (control), 1.0 wt%, and 2.0 wt%. The Tgs were analyzed using 3 different methods: differential scanning colorimetry (DSC), differential thermal analysis (DTA), and thermomechanical analysis (TMA). Thermal stability was analyzed using thermogravimetric analysis (TGA) and its derivative (DTG). EMs were evaluated using a TMA device. A total of 96 specimens were used during the experiments, including 30 specimens for each test (thermal stability, Tg, and EM), in each subgroup (n=10) and 6 specimens for microscope and composition analyses (n=2). The effective sample size was calculated using G*power 3.1.9.7, and the collected data were analyzed using ANOVA for Tg and repeated-measures ANOVA for thermal stability and EM followed by the Tukey post hoc test (α=.05). RESULTS: Increasing the TiO2 NTs concentration improved the thermal stability (TGA and DTG) (P
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Master's student, Department of Prosthodontics, College of Dentistry, University of Baghdad, Baghdad, Iraq; Assistant Lecturer, Department of Prosthodontics, College of Dentistry, Al-Mustansiriyah University, Baghdad, I…
- Assistant Professor, Department of Prosthodontics, College of Dentistry, University of Baghdad, Baghdad, Iraq.
- Senior Lecturer, Department of Engineering, Manchester Metropolitan University, Manchester, England, United Kingdom. Electronic address: j.haider@mmu.ac.uk.
Förderung
- University of Baghdad
Zitieren
APA
Al-Enbary, Z. B., Safi, I. N., & Haider, J. (2026). Assessing impact of titanium dioxide nanotube incorporation on the glass transition temperature and thermal stability of 3D printed complete denture base resin. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2026.01.009
Vancouver
Al-Enbary ZB, Safi IN, Haider J. Assessing impact of titanium dioxide nanotube incorporation on the glass transition temperature and thermal stability of 3D printed complete denture base resin. The Journal of Prosthetic Dentistry. 2026. doi:10.1016/j.prosdent.2026.01.009
BibTeX
@article{AlEnbary2026,
author = {Al-Enbary, Zaid Basil and Safi, Ihab Nabeel and Haider, Julfikar},
title = {Assessing impact of titanium dioxide nanotube incorporation on the glass transition temperature and thermal stability of 3D printed complete denture base resin},
journal = {The Journal of Prosthetic Dentistry},
year = {2026},
doi = {10.1016/j.prosdent.2026.01.009}
}
EUVIMED