Influence of postprinting cleaning methods on the cleaning efficiency and surface and mechanical properties of three-dimensionally printed resins
The Journal of Prosthetic Dentistry · 2024
DOI: 10.1016/j.prosdent.2024.02.026 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2024. Verfasst von Ok Hyung Nam und 7 weiteren Autor:innen. Beteiligte Einrichtung: Associate Professor, Department of Pediatric Dentistry, Kyung Hee University, College of Dentistry, Kyung Hee University Medical Center, Seoul, Repub…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Surface Properties, Materials Testing. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 30 Literaturangaben.
Abstract (Originalsprache)
STATEMENT OF PROBLEM: The outcome of photopolymerized 3-dimensional (3D) printing is influenced by the methods used for postprinting cleaning, yet information on postprinting cleaning is sparse. PURPOSE: The purpose of this in vitro study was to assess the cleaning efficiency and surface and mechanical properties of 3D printed resin according to postprinting cleaning methods. MATERIAL AND METHODS: Specimens were fabricated from a 3D model using resin materials (NextDent C&B MFH and DIOnavi-P. MAX) and were tested for postprinting cleaning methods for 5 minutes with isopropyl alcohol, isopropyl alcohol + ultrasonic, ethyl alcohol, ethyl alcohol + ultrasonic, and ultrasonic alone. Postpolymerization was followed for 5 minutes. The cleaning efficiency, microcomputed tomography (µCT), surface roughness, Vickers hardness, and flexural strength of the specimens were evaluated. The 1-way ANOVA test was performed after considering normality. A post hoc analysis with Bonferroni was also performed (α=.008 or.005). RESULTS: Ultrasonic in addition to cleaning solutions significantly improved the cleaning efficiency in NextDent C&B MFH specimens (P .005). No significant changes in surface hardness were observed by postprinting cleaning methods (P>.008). In the NextDent C&B MFH, ethyl alcohol + ultrasonic significantly decreased the flexural strength (P .005). CONCLUSIONS: Ethyl alcohol was comparable with isopropyl alcohol for use as a postprinting cleaning solution for both NextDent C&B MFH and DIOnavi-P. MAX. The addition of ultrasonic to cleaning solutions should be applied with caution. These findings suggest that different postprinting cleaning methods can be recommended depending on the 3D printed resin materials.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Associate Professor, Department of Pediatric Dentistry, Kyung Hee University, College of Dentistry, Kyung Hee University Medical Center, Seoul, Republic of Korea; and Associate Professor, Department of Pediatric Dentist…
- Associate Professor, Department of Civil and Environmental Engineering, Yonsei University, Seoul, Republic of Korea.
- Professor, Department of Pediatric Dentistry, Dental Research Institute, School of Dentistry, Seoul National University, Seoul, Republic of Korea.
- Department of Dentistry, Graduate School, Kyung Hee University, Seoul, Republic of Korea.
- PhD student, Department of Prosthodontics, College of Dentistry, Yonsei University, Seoul, Republic of Korea.
- PhD student, Department of Civil and Environmental Engineering, Yonsei University, Seoul, Republic of Korea.
Zitieren
APA
Nam, O. H., Chung, S. Y., Hyun, H. K., Ye, J. R., Jeong, Y., Oh, S. E., Chae, Y. K., & Lee, H. (2024). Influence of postprinting cleaning methods on the cleaning efficiency and surface and mechanical properties of three-dimensionally printed resins. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2024.02.026
Vancouver
Nam OH, Chung SY, Hyun HK, Ye JR, Jeong Y, Oh SE, et al. Influence of postprinting cleaning methods on the cleaning efficiency and surface and mechanical properties of three-dimensionally printed resins. The Journal of Prosthetic Dentistry. 2024. doi:10.1016/j.prosdent.2024.02.026
BibTeX
@article{Nam2024,
author = {Nam, Ok Hyung and Chung, Sang-Yeop and Hyun, Hong-Keun and Ye, Ju Ri and Jeong, Yuwon and Oh, Seo-Eun and Chae, Yong Kwon and Lee, Hyeonjong},
title = {Influence of postprinting cleaning methods on the cleaning efficiency and surface and mechanical properties of three-dimensionally printed resins},
journal = {The Journal of Prosthetic Dentistry},
year = {2024},
doi = {10.1016/j.prosdent.2024.02.026}
}
EUVIMED